I'm not entirely sure when things broke, but somewhere in 1.3 my SNMP stopped working. I've tried version 1 and version 2c. I get lots of messages about unhandled UDP packets on the switch (only a warning perhaps).
However, using Cacti I can no longer get the switch to return any results. I upgraded to 1.3.7 and now I can get Cacti to get the interface names and such, but I'm still getting 0 for throughput.
This worked in 1.1.x and 1.2.x versions.
Can not get SNMP to work since some 1.3 variant
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can not get SNMP to work since some 1.3 variant
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: Can not get SNMP to work since some 1.3 variant
I haven't loaded the new MIB, but I should still be able to pull interface information without that, no? Throughput is, as the link even states, using standard MIB information.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: Can not get SNMP to work since some 1.3 variant
Any ideas? Nothing I do is making this work.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can not get SNMP to work since some 1.3 variant
Are you making sure to configure the switch to the proper SNMP version on the Device/Configuration Tab?
- avatar.jpg (187.1 KiB) Viewed 10997 times
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: Can not get SNMP to work since some 1.3 variant
Yes,
I have tried both 1 and 2c and neither works. Both will allow Cacti to pull up information about the switch, including interface names and capacity, but the reported throughput counters are always 0.
I have tried both 1 and 2c and neither works. Both will allow Cacti to pull up information about the switch, including interface names and capacity, but the reported throughput counters are always 0.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Can not get SNMP to work since some 1.3 variant
mhoppes wrote:Yes,
I have tried both 1 and 2c and neither works. Both will allow Cacti to pull up information about the switch, including interface names and capacity, but the reported throughput counters are always 0.
I have never used Cacti. I have hear others on here talking about it though?
Eric is hard at work fixing some issues for firmware v1.3.8 but after that he is supposed to take several days and set up several SNMP servers and verify we have no issues.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
tcknudson - Member
- Posts: 61
- Joined: Fri Oct 30, 2015 6:43 am
- Location: Henderson, NV
- Has thanked: 4 times
- Been thanked: 22 times
Re: Can not get SNMP to work since some 1.3 variant
- Solar Winds
- snmp Netonix.PNG (30.1 KiB) Viewed 10975 times
- Attachments
-
- snmp Netonix solar winds.PNG (17.36 KiB) Viewed 10975 times
8 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 54 guests