OK, I know I am going to get crucified but here it goes.
OK so we have already had 2 set backs on this production run of 1,000 switches
1) Shipment of boards from Canada got held up in customs several days
2) Shipment of internal DC cables from China got held up in production several days
Now this was bad enough and set us back almost a week.
So all the WS-8-250-DC units were assembled and today we were finishing up the WS-12-DC units.
We went to start setting up to assemble the WS-12-250-DC units and we went to the inventory room to retrieve the decals for the WS-12-250-DC units and there were only (3)....YES I SAID THREE.
Apparently I messed up the order for face decals and there was no WS-12-250-DC decals in the last order.
I have a call into the decal place in California and I am trying to see how quickly we can get a RUSH order done, going to be expensive but this is not your problem that is mine but this prevents us from starting the assembly of the WS-12-250-DC unit.
I will update this when I know more information.
We will complete the WS-12-DC and WS-8-250-DC and begin shipping them as soon as possible.
I am really sorry about this, this is all "my" fault, I dropped the ball.
DC Switch ETA
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
CURRENT BATCH OF DC SWITCHES - DELAY
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
kbloch - Member
- Posts: 34
- Joined: Thu Sep 04, 2014 10:45 am
- Location: Western USA
- Has thanked: 1 time
- Been thanked: 6 times
Re: DC Switch ETA
I am just going to make a guess that my single switch that I ordered is not in the first three that have decals.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC Switch ETA
It gets worse, those (3) decals I thought I had as I didn't look close at them, they are WS-8-250-DC decals that were in the WS-12-250-DC bin.
So I am waiting on phone call from California right now.
So I am waiting on phone call from California right now.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rockhead - Experienced Member
- Posts: 119
- Joined: Mon Aug 04, 2014 7:09 pm
- Has thanked: 53 times
- Been thanked: 35 times
Re: DC Switch ETA
Get your ass over to the cross, I'll bring the nails 
Just kidding
if I have to wait, I have to wait, that's life
Just kidding
if I have to wait, I have to wait, that's life
-
sdwisp - Member
- Posts: 20
- Joined: Tue May 19, 2015 11:21 am
- Location: San Diego Ca
- Has thanked: 4 times
- Been thanked: 3 times
Re: DC Switch ETA
If the hold up on my order is only stickers I have a Costco label makers and I will label them.
http://www.costco.com/Brother-P-touch%C ... 09240.html
Eric Williams
SDWISP
http://www.costco.com/Brother-P-touch%C ... 09240.html
Eric Williams
SDWISP
Eric Williams
619-468-9600
SDWISP
619-468-9600
SDWISP
-
suge - Member
- Posts: 13
- Joined: Thu Sep 04, 2014 12:49 pm
- Location: Juneau, Alaska
- Has thanked: 2 times
- Been thanked: 0 time
Re: DC Switch ETA
So the 8's are ready to go though? Or did I read that wrong?
HNIC - www.thesnowcloud.com
-
rconaway - Associate
- Posts: 23
- Joined: Wed Apr 15, 2015 3:32 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: DC Switch ETA
Looks like my crappy TS-5 switches are going to have to survive another few days.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC Switch ETA
suge wrote:So the 8's are ready to go though? Or did I read that wrong?
The WS-8-250-DC units we have assembled and will begin to FLASH and ship tomorrow.
The WS-12-DC units are assembled will begin to FLASH and ship after WS-8-250-DC
WS-12-250-DC units are on hold for Front Decal, awaiting call back from supplier - TOTALLY MY FAULT GUYS
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: No registered users and 16 guests