DC Switches
-
petecarlson - Experienced Member
- Posts: 107
- Joined: Thu Aug 28, 2014 7:04 pm
- Location: Baltimore, MD
- Has thanked: 15 times
- Been thanked: 10 times
Re: DC Switches
I see I can pre-order the DIN mounts, but can't pre-order the WS-12-250-DC anymore... Does this mean the September batch is sold out already? I need more.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC Switches
petecarlson wrote:I see I can pre-order the DIN mounts, but can't pre-order the WS-12-250-DC anymore... Does this mean the September batch is sold out already? I need more.
No it means we do not yet have a firm delivery date and then I will get endless emails asking when they are shipping.
Soon as I know a firm date I will open it up for pre-orders, maybe in the next day or 2
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
petecarlson - Experienced Member
- Posts: 107
- Joined: Thu Aug 28, 2014 7:04 pm
- Location: Baltimore, MD
- Has thanked: 15 times
- Been thanked: 10 times
Re: DC Switches
Thanks, ordered four from Streakwave which has them backordered. Might order a few more direct when ordering opens up again just to be sure. It can't hurt to have a few extras in stock till supply stabilizes.
Re: DC Switches
We just got 5 (1 12 port and 4 - 8 port) switches in Monday. I installed 4 of them yesterday. I forgot to take pictures. So far they are just humming along. I am having an issue accessing the SNMP variable for the voltage, but I am sure that is just my issue and I'll figure it out.
We plan to order about 15 more as we can afford them. These will just be for solar sites, powering UBNT gear. We are sticking with AC for our grid attached sites. We used to run everything off DC, but as we moved to Airfibers and higher powered radios, it just became easier to go back to AC. We have had good results pairing the Netonix with the Tripp Lite APS750 Inverter / Charger.
We plan to order about 15 more as we can afford them. These will just be for solar sites, powering UBNT gear. We are sticking with AC for our grid attached sites. We used to run everything off DC, but as we moved to Airfibers and higher powered radios, it just became easier to go back to AC. We have had good results pairing the Netonix with the Tripp Lite APS750 Inverter / Charger.
-
eomedia - Member
- Posts: 46
- Joined: Wed Jun 03, 2015 6:56 pm
- Location: Aurora, CO
- Has thanked: 5 times
- Been thanked: 4 times
Re: DC Switches
As I mentioned, here's a picture with our universal DIN rail mount - and the Netonix switch.
Last edited by eomedia on Wed Sep 09, 2015 12:58 am, edited 1 time in total.
-
qresto - Member
- Posts: 3
- Joined: Mon Jun 01, 2015 3:49 pm
- Location: Guaynabo, Puerto Rico
- Has thanked: 0 time
- Been thanked: 0 time
Re: DC Switches
we have a few of then but not in production yet
for now is working excellent on the lab
and yes they need better mounting option
for now is working excellent on the lab
and yes they need better mounting option
-
petecarlson - Experienced Member
- Posts: 107
- Joined: Thu Aug 28, 2014 7:04 pm
- Location: Baltimore, MD
- Has thanked: 15 times
- Been thanked: 10 times
Re: DC Switches
Can the DIN clip be rotated 90 degrees for vertical mounting?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC Switches
petecarlson wrote:Can the DIN clip be rotated 90 degrees for vertical mounting?
Not the current design but I can look into it for future designs.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
petecarlson - Experienced Member
- Posts: 107
- Joined: Thu Aug 28, 2014 7:04 pm
- Location: Baltimore, MD
- Has thanked: 15 times
- Been thanked: 10 times
Re: DC Switches
Could one drill new holes and mount the din clip rotated 90 degrees?
Who is online
Users browsing this forum: No registered users and 12 guests