Received a customer call about internet dropping frequently. Traced it back to the MINI switch that feeds that POP.
I have an email into the home owner where the MINI switch is at, but I've known them for years and doubt they are unplugging anything.
Is the MINI having issues? Is it too hot? What things can I look for?
http://pasteboard.co/28ETRnJG.png
WS-MINI rebooting
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-MINI rebooting
Nope, never heard of one rebooting.
I would look for a power supply issue, what are you using to power it.
A bad crimp end if powering via POE IN on port 1.
If one pin is not getting good a connection on one of the pins and it gets starved for power.
Too HOT???? Not even close to a heat issue from your screen shot.
Although I would upgrade the firmware while your there NOT that that is your issue just a reminder to keep your firmware upgraded.
I would look for a power supply issue, what are you using to power it.
A bad crimp end if powering via POE IN on port 1.
If one pin is not getting good a connection on one of the pins and it gets starved for power.
Too HOT???? Not even close to a heat issue from your screen shot.
Although I would upgrade the firmware while your there NOT that that is your issue just a reminder to keep your firmware upgraded.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-MINI rebooting
If you are powering it with a POE adapter that is just a standard 48V POE adapter only supplying power on 4 wires (2 pair) it would not supply enough power and it would reboot when the 2 devices tried to transmit at the same time.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: WS-MINI rebooting
I'm using a UBNT AF poe brick to power it. After I made the post above I did update firmware for the hell of it.
I'll keep an eye on it and report back. It goes out and comes back so quick my paging system doesn't even notify me of an outage, but customers that use the internet every second of the day are sure to let me hear about it. ;)
Thanks
I'll keep an eye on it and report back. It goes out and comes back so quick my paging system doesn't even notify me of an outage, but customers that use the internet every second of the day are sure to let me hear about it. ;)
Thanks
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-MINI rebooting
The firmware would not cause this as there was no bugs that caused rebooting.
My guess is a power issue possibly from a bad crimp.
Can you do a cable diagnostics on port 1 and post the screen shot here and also tell me what is plugged into port 1 beyond the POE adapter?
My guess is a power issue possibly from a bad crimp.
Can you do a cable diagnostics on port 1 and post the screen shot here and also tell me what is plugged into port 1 beyond the POE adapter?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: WS-MINI rebooting
Ran the test a few different times, mixed results.
- Attachments
-
- mini-cable-diag.png (90.76 KiB) Viewed 16159 times
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-MINI rebooting
Do you have an Ethernet Surge protector on this cable, they can mess up this test?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: WS-MINI rebooting
Nope, just right into an AF PoE. All the local customer has is a TP Link router plugged into the LAN side of the PoE brick.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-MINI rebooting
Not sure what to tell you then?
If you have spare switch you could swap it out and if it still reboots you know it is NOT the switch then there must be something wrong with POE brick, cabling, or the homeowners power is blinking????
If you have spare switch you could swap it out and if it still reboots you know it is NOT the switch then there must be something wrong with POE brick, cabling, or the homeowners power is blinking????
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: WS-MINI rebooting
I'll try new ends tomorrow. After that I'll try a spare MINI I have layin around. Thanks
Who is online
Users browsing this forum: No registered users and 31 guests