Hi
Just to say that I've been working with the folks at the LibreNMS irc channel to get my first Netonix switch recognised. They've just added support to the trunk so you should be able to discover it.
It now seems to support the 6 port version but I've not tested any others.
If there are any additional SNMP things that you are planning to add, I'm sure the LibreNMS folk can add it in. They seem very supportive generally and of WISPs in particular, with good UBNT and Mikrotik support.
Best regards
Tim Robinson
Basingstoke, UK
LibreNMS support for Netonix
-
ColoCenter - Member
- Posts: 16
- Joined: Tue Sep 29, 2015 2:11 pm
- Location: Netherlands
- Has thanked: 2 times
- Been thanked: 3 times
Re: LibreNMS support for Netonix
I added a WS-24-400A to my libreNMS. It's recognized, it read's the ports. But it's missing temperatures/fanspeeds etc for example. Also Vlan's aren't "seen", and the arp table isn't populated.
Other thing i have a massive spikes in the traffic graphs. Up to multiple Gbits, even 50Gbit, and that on a 1Gbit port?!?! Not sure what's causing this. Already tried switching to SNMPv1. Running firmware 1.3.3 by the way. See the graph here:
None of the other monitored devices(143) has this problem. Any suggestions here?
Thanks
Alexander
Other thing i have a massive spikes in the traffic graphs. Up to multiple Gbits, even 50Gbit, and that on a 1Gbit port?!?! Not sure what's causing this. Already tried switching to SNMPv1. Running firmware 1.3.3 by the way. See the graph here:
None of the other monitored devices(143) has this problem. Any suggestions here?
Thanks
Alexander
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 14 guests