WS-6-MINI Power Options

[sirhc]

Is the Ubiquity POE-50-60W the only 48VH PoE on the market?

We will be selling a 50V 65W and a 50V 90W POE adapter by end of July

We will also be selling a Barrel Connector adapter in a couple weeks

[Dawizman]

Thanks for the quick answers guys. Need one of these for a solar site until the bigger DC models are available. We're using all 24v radios, so we should be good to go. I'll be picking up s WS-8-250-DC as soon as they are available though. I'd like to use the switch to monitor battery voltage with PRTG instead of having additional equipment to do so. Trying to keep the watts as low as possible.

[keefe007]

Are there any off the shelf power supplies with barrel connectors that work with this switch?

[sirhc]

I do not know

We will have a 50V 1.3A next week

[sirhc]

We now offer a 1.3 AMP Barrel connector power adapter for the WS-6-MINI on our web store if anyone is interested.

http://www.netonix.com/gp306a-500-130.html

[JustJoe]

Is the Ubiquity POE-50-60W the only 48VH PoE on the market?

We will be selling a 50V 65W and a 50V 90W POE adapter by end of July

We will also be selling a Barrel Connector adapter in a couple weeks

1) Did the 65W and 90W appear anywhere, or are we still waiting on those?

2) If they are not available, are the UBNT AF 60W working well for everyone for now (within 60W limit)? For example, are they passing stable GigE negotiated data connections to the Mini as expected?

[sirhc]

Is the Ubiquity POE-50-60W the only 48VH PoE on the market?

We will be selling a 50V 65W and a 50V 90W POE adapter by end of July

We will also be selling a Barrel Connector adapter in a couple weeks

1) Did the 65W and 90W appear anywhere, or are we still waiting on those?

2) If they are not available, are the UBNT AF 60W working well for everyone for now (within 60W limit)? For example, are they passing stable GigE negotiated data connections to the Mini as expected?

We do not yet have a POE Adapter, maybe this fall.

Yes the UBNT AF24 or AF5 POE adapter works well as does the MIMOSA POE Adapter since the WS-6-MINI has polarity correcting circuits on the POE "IN" on Port 1, and only on Port 1.

[JustJoe]

...

We do not yet have a POE Adapter, maybe this fall.

Yes the UBNT AF24 or AF5 POE adapter works well as does the MIMOSA POE Adapter since the WS-6-MINI has polarity correcting circuits on the POE "IN" on Port 1, and only on Port 1.

OK, I have not had one in my hands yet. And I have read the POE confusion thread.

But isn't the POE "IN" to power the MINI (only) on port 1 ? Isn't port 2 just 24VH or 48VH POE out ?

[sirhc]

YES - PORT 1 POE IN

[yoder]

I have some of these:

http://routerboard.com/RBGPOE

Would this work for a POE adapter? Here's what the datasheet says:

Power: 4,5 Cable Pins - 9-48V; 7,8 Pins - Return

I installed a switch on Thursday using a Passive POE that uses the same pins as the 24V ubnt POE adapters. The input voltage on the status page of the switch is showing 42V. It started out a lot closer to 48V but as I added things it went lower and lower. Reading this thread, I'm thinking the two wires with power can't supply enough current.