Hi,
Can anyone confirm Mikrotik SFP S-31DLC20D or S-85DLC05D are compatible for Netonix WISP Switch WS-12-250A ?.
http://routerboard.com/S-31DLC20D
http://routerboard.com/S-85DLC05D
Thanks
Frank
Mikrotik SFP Compatibility
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Mikrotik SFP Compatibility
I do not know if they are compatible but there was fixes put into the 1.2.0rcXX which was for MicroTik SFP modules so if you try then with v1.1.8 and they do not work please upgrade to v1.2.0rc11 and try that.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Mikrotik SFP Compatibility
I'm using some copper mikrotik sfp's in my switches and they work fine. I would think the fiber modules would also. I have some laying around that are just like what you posted. I'll give them a go and let you know.
- frank
Re: Mikrotik SFP Compatibility
Hi,
Mikrotik SFP S-31DLC20D doesn't seems to be working in the switch. Is there any fix which addresses the Mikrotik SFPs ?/
Mikrotik SFP S-31DLC20D doesn't seems to be working in the switch. Is there any fix which addresses the Mikrotik SFPs ?/
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Mikrotik SFP Compatibility
frank wrote:Hi,
Mikrotik SFP S-31DLC20D doesn't seems to be working in the switch. Is there any fix which addresses the Mikrotik SFPs ?/
WHat version of Firmware are you running?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Mikrotik SFP Compatibility
frank wrote:Hi,
Mikrotik SFP S-31DLC20D doesn't seems to be working in the switch. Is there any fix which addresses the Mikrotik SFPs ?/
I ordered these and they arrived today. Tested on several switches running 1.2.0 and up and they seem to work fine.
-
LRL - Experienced Member
- Posts: 238
- Joined: Sun Nov 23, 2014 4:00 am
- Location: Rock Springs, WY
- Has thanked: 18 times
- Been thanked: 49 times
Re: Mikrotik SFP Compatibility
I had tested these a couple of weeks ago on 1.2.2 Board Rev B and they didn't work when linking to a CCR1036. I will have to re-test to make sure.
-LRL
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
-
LRL - Experienced Member
- Posts: 238
- Joined: Sun Nov 23, 2014 4:00 am
- Location: Rock Springs, WY
- Has thanked: 18 times
- Been thanked: 49 times
Re: Mikrotik SFP Compatibility
Here is the deal with the Mikrotik S-31DLC20D modules. They work fine from WISP switch to WISP Switch and from Mikrotik to WISP.
Mikrotik's devices have Auto Negotiation turned on for their SFPs by default, you have to disable auto if you want to link mikrotik to WISP switch. This is a pretty standard issue, but I thought I'd mention it.
I was mistaken, it's the mikrotik s-53lc20d -- s-35lc20d modules that don't work.
We have a tower site that we have 6 stands of SM fiber ran into it. Initially we were only using a pair, but now we're running three fiber drops to other near by towers and we've been forced to resort to the WDM modules.
Mikrotik's devices have Auto Negotiation turned on for their SFPs by default, you have to disable auto if you want to link mikrotik to WISP switch. This is a pretty standard issue, but I thought I'd mention it.
I was mistaken, it's the mikrotik s-53lc20d -- s-35lc20d modules that don't work.
We have a tower site that we have 6 stands of SM fiber ran into it. Initially we were only using a pair, but now we're running three fiber drops to other near by towers and we've been forced to resort to the WDM modules.
-LRL
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
9 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 14 guests