JustJoe wrote:OK, I caught this being mentioned in one of the other threads here. Did I miss the specs or plans on it?
My wish list:
1) Independent WLAN0, LAN0, and LAN1 interfaces.
2) Bridge mode or Router mode with PPPoE option supporting MTU=1500 .
3) At least 2x2 mimo.
4) Native GUI (instead of trying to manage a stupid cloud based GUI behind the primary rooftop CPE.
5) Optional Traffic Shaping on each interface.
6) SNMP read access.
7) unobtrusive wall or ceiling mount.
8) POE "client" option to power it
9) Minimum 23dBm output.
10) DHCP reservations
11) Low brightness LEDs (it is for indoor after all)
12) Silent switching power regulator.
Higher priced "HP" model
1) POE "server" to power other boxes
2) ???
Just figured I would get the ball rolling.![]()
1) Check
2) Check
3) Check
4) Check
5) Check
6) Check
7) Not meant for ceiling, this is not a UniFi type device maybe you should read more about it. http://www.netonix.com/cap-fxs-1.html
Think of the airROUTER but with a software controlled POE WAN port, MIMO 2X2, high power, optional FXS port, and a lot more software option.
8) It is meant to power client radio on the roof not be powered by POE
9) Check
10) Check
11) well this is relative to individual interpretation I guess
12) Check
Hope this helps?