Hello All
I'm trying to set up a vlan with a SAF Lumina between 2 ws-12-250B switches. i follow the direction in the SAF manual but unsure where to start in the wisp switch. has anyone done this with SAF that can help me please
Andy
SAF Tehnika VLAN
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: SAF Tehnika VLAN
Hi Andy,
You need to be more descriptive here as this is not much information to help you with.
The fact that you are using SAF links is irrelevant as it is just a transparent bridge, same as plugging a cable between the 2 switches (if the links are linked and working properly).
At this point the 2 switches are bridged (Layer 2).
What is the purpose of the intended VLAN?
You need to be more descriptive here as this is not much information to help you with.
The fact that you are using SAF links is irrelevant as it is just a transparent bridge, same as plugging a cable between the 2 switches (if the links are linked and working properly).
At this point the 2 switches are bridged (Layer 2).
What is the purpose of the intended VLAN?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
andy - Member
- Posts: 9
- Joined: Mon Apr 20, 2015 5:33 pm
- Location: Sacramento, CA
- Has thanked: 0 time
- Been thanked: 1 time
Re: SAF Tehnika VLAN
not sure the best way to explain it but SAF LUMINA has a built in vlan feature you have to configure and you have to configure the vlans in the switches also
Im just trying to separate our WAN traffic from our LAN. basically we have a new tower we brought fiber to and send it over the SAF link to our headend but now we would like to also use the tower to serve a few customers. now i need to bring our LAN back to the tower. it all in the SAF LUMINA manual but the VLAN function in the wisp switch is a bit different than the cisco im used to
Im just trying to separate our WAN traffic from our LAN. basically we have a new tower we brought fiber to and send it over the SAF link to our headend but now we would like to also use the tower to serve a few customers. now i need to bring our LAN back to the tower. it all in the SAF LUMINA manual but the VLAN function in the wisp switch is a bit different than the cisco im used to
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: SAF Tehnika VLAN
I am pretty sure the SAF VLAN you are talking about is the management VLAN ID?
The VLAN configuration in our switch is pretty simple, you create a VLAN and specify which ports participate in the VLAN and if they accept Tagged or Un-Tagged packets. It is pretty much very similar to the Ubiquiti VLAN configuration interface on the ToughSwitch.
As I said maybe a network diagram explaining what you want to do would help us understand your goal. THe diagram should show what ports you want to use for what and what plugs into those ports such as your router and or other switches.
The VLAN configuration in our switch is pretty simple, you create a VLAN and specify which ports participate in the VLAN and if they accept Tagged or Un-Tagged packets. It is pretty much very similar to the Ubiquiti VLAN configuration interface on the ToughSwitch.
As I said maybe a network diagram explaining what you want to do would help us understand your goal. THe diagram should show what ports you want to use for what and what plugs into those ports such as your router and or other switches.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: SAF Tehnika VLAN
From SAF manual
I think if this feature is disable, it should let pass unknow VLAN through. I didn't try it right now but will have to try it soon.
Drop invalid VLAN – frames with no corresponding entry in VLAN table are being dropped.
I think if this feature is disable, it should let pass unknow VLAN through. I didn't try it right now but will have to try it soon.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 22 guests