v1.5.17rcX Bug Reports and Comments

DOWNLOAD THE LATEST FIRMWARE HERE
User avatar
wtm
Experienced Member
 
Posts: 262
Joined: Sun Jan 11, 2015 12:17 am
Location: Arizona
Has thanked: 41 times
Been thanked: 36 times

Re: v1.5.17rcX Bug Reports and Comments

Thu Sep 19, 2024 7:12 pm

Just so you are aware, the hacker put up a new page on the hack, asking Netonix if they want to pay to fix this problem, there is a link below the message to contact them.

I would think that now makes it officially ransomware, and extortion ! Time to call the FBI on this.

phongc@smwd.com
Member
 
Posts: 6
Joined: Tue Sep 13, 2016 5:42 pm
Has thanked: 3 times
Been thanked: 0 time

Re: v1.5.17rcX Bug Reports and Comments

Tue Oct 08, 2024 7:11 pm

I think there is a bug with MAC table. I cannot see mac address tied to the port anymore. I was running version 1.5.12 and updated to the latest version 1.5.17rc2 recently. I was running version 1.5.12 for a long time before this upgrade and the mac table has always worked. Could you add this to the fix for the next release.

User avatar
Stephen
Employee
Employee
 
Posts: 1030
Joined: Sun Dec 24, 2017 8:56 pm
Has thanked: 85 times
Been thanked: 181 times

Re: v1.5.17rcX Bug Reports and Comments

Tue Oct 08, 2024 11:03 pm

This version had the mac table reduced in size due to spacing required for security related upgrades.

However, we have a new version in progress that will fix this.

RTGLW
Member
 
Posts: 13
Joined: Thu Jun 08, 2023 7:25 pm
Location: New Zealand
Has thanked: 12 times
Been thanked: 6 times

Re: v1.5.17rcX Bug Reports and Comments

Sun Oct 13, 2024 10:26 pm

Hi team,

Our production 1.5.17rc2 test unit appears to be showing the same SNMP related memory leak issue that we saw in 1.5.14, which was successfully resolved in subsequent 1.5.15rc2 and rc3 releases.

Memory utilization on our test host was stable until upgrading from 1.5.15rc3 to 1.5.17rc2, where we can see consistent memory loss. None of the switch's configuration was changed other than the firmware version. Toggling the SNMP server off and back on frees up that memory again as it had done in 1.5.14, as shown below;


1.5.17rc2 test unit memory graph

User avatar
Stephen
Employee
Employee
 
Posts: 1030
Joined: Sun Dec 24, 2017 8:56 pm
Has thanked: 85 times
Been thanked: 181 times

Re: v1.5.17rcX Bug Reports and Comments

Mon Oct 14, 2024 11:23 am

RTGLW wrote:Hi team,

Our production 1.5.17rc2 test unit appears to be showing the same SNMP related memory leak issue that we saw in 1.5.14, which was successfully resolved in subsequent 1.5.15rc2 and rc3 releases.

Memory utilization on our test host was stable until upgrading from 1.5.15rc3 to 1.5.17rc2, where we can see consistent memory loss. None of the switch's configuration was changed other than the firmware version. Toggling the SNMP server off and back on frees up that memory again as it had done in 1.5.14, as shown below;


1.5.17rc2 test unit memory graph


Thanks for the information, we'll check this for the upcoming release.

Previous
Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 8 guests