Using WS-12-DC to power ePMP 1000 Radio

[evinmoh]

Netonix switch POE not powering up a Non-GPS Sync ePMP 1000 connectorized Radio.

The switch currently powers other ePMP 1000 GPS connectorized radios at the site via it POE port

Anybody has an idea of how to make it work.

Can it work by using a crossover cable by swapping the pins 4 and 5 with 7 and 8?

Kindly assist

[ahteran]

Yes the netonix side is blue-white blue. brown-white brown at epmp 1000

[ewolff06]

We use these to power radios with Canopy style wiring



https://www.tyconsystems.com/poe-xover-s