Canopy POE Support
-
ginovilla - Member
- Posts: 38
- Joined: Thu Feb 12, 2015 11:01 am
- Location: San Juan, Puerto Rico
- Has thanked: 0 time
- Been thanked: 5 times
Canopy POE Support
Can we get Canopy POE support on the WISP and Tower SW series? its 24 vdc reverse pins , That would expand your market share to Canopy and EPMP users
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Canopy POE Support
ginovilla wrote:Can we get Canopy POE support on the WISP and Tower SW series? its 24 vdc reverse pins , That would expand your market share to Canopy and EPMP users
Dave and I will discuss this but it will not happen overnight!
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
LRL - Experienced Member
- Posts: 238
- Joined: Sun Nov 23, 2014 4:00 am
- Location: Rock Springs, WY
- Has thanked: 18 times
- Been thanked: 49 times
Re: Canopy POE Support
ginovilla wrote:Can we get Canopy POE support on the WISP and Tower SW series? its 24 vdc reverse pins , That would expand your market share to Canopy and EPMP users
The last Canopy radios I used only support 10/100, if that's still the the case simply change the wiring on one end of your cables or make an adapter that does this.
https://community.ubnt.com/t5/Business- ... 007#M31221
-LRL
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
"My reading of history convinces me that most bad government results from too much government." - Thomas Jefferson
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Canopy POE Support
I was wondering about ePMP radio's on the WS myself the other day but had not looked up the pin out. I guess there would be no way in software to just say "reverse polarity"?
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Canopy POE Support
adairw wrote:I was wondering about ePMP radio's on the WS myself the other day but had not looked up the pin out. I guess there would be no way in software to just say "reverse polarity"?
LOL - nope, but we are discussing this
So far I have always been PRO Ubiquiti even though it has been a 1 way relationship as of late
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Canopy POE Support
If it can be fixed by using an adapter cable at the switch or the radio (so it can be labeled as such) I think that would be good enough.
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Canopy POE Support
adairw wrote:If it can be fixed by using an adapter cable at the switch or the radio (so it can be labeled as such) I think that would be good enough.
Yea we can made a little adapter, not the prettiest solution.
You guys might be surprised at what is being discussed right now!
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Torolan - Member
- Posts: 25
- Joined: Mon Feb 16, 2015 6:49 pm
- Location: Joplin, Missouri
- Has thanked: 2 times
- Been thanked: 7 times
Re: Canopy POE Support
Would be great to see the option to power the Canopy gear with an adapter etc.
We are phasing out Cambium gear for the most part, but would be cool to get rid of more POEs at the towers and still have option to reboot these radios remotely.
We are phasing out Cambium gear for the most part, but would be cool to get rid of more POEs at the towers and still have option to reboot these radios remotely.
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Canopy POE Support
Torolan wrote:Would be great to see the option to power the Canopy gear with an adapter etc.
We are phasing out Cambium gear for the most part, but would be cool to get rid of more POEs at the towers and still have option to reboot these radios remotely.
We can look into an adapter, can you post the pin out, and power requirements here?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: Canopy POE Support
sirhc wrote:Torolan wrote:Would be great to see the option to power the Canopy gear with an adapter etc...
We can look into an adapter, can you post the pin out, and power requirements here?
My thought was to make the polarity swap in a surge protector. That way you could just swap the guts if you need to change the polarity and the cables stay the same.
Who is online
Users browsing this forum: Bing [Bot] and 22 guests