Manual for WS-6-MINI and Red LEDs

[JRayfield]

I haven't used any Netonix switches (yet) but I'm starting to work with a point-to-point network (using Ubiquiti AF4x radios) that someone else installed, that uses Netonix switches.

I've tried to find a manual on the WS-6-MINI switch, so that I can read up on how they're set up, etc, but I can't find any manuals anywhere online. Is there somewhere online where I can download Netonix manuals?

I do have a specific question, too. On one of the WS-6-MINI switches, there are red leds lit up next to some of the switch ports and not lit up next to some of the switch ports. What do these red leds indicate?

John

[Stephen]

The red led's indicate that those port's are using VH power. As in, Power Over Ethernet on those ports is activated and set to either 48V or 48VH. They can also be set to 24V or 24VH which will simply be a green LED lit on the right side of the port supplying the POE output.

As far as the manual goes.
https://www.netonix.com/media/wysiwyg/ws-specsheet.pdf

But you can also find sirhc showing how the switches work in general in great detail on his youtube vid.
https://www.youtube.com/watch?v=8JvBEAD4MFM

And support for the switches, is done on these forum's as I presume you already know.
There is a LOT of information on here that can most likely solve most issue's you'll run into.

[JRayfield]

Thank you very much. I really do appreciate this help.

John

[sirhc]

You know there is a big sticker on the outside of that switch that explain the lights?

CLICK IMAGE TO VIEW FULL SIZE