Well I just finished posting up v1.1.0rc18 to fix some bugs reported by Joe and Adair.
Many thanks to Rory and Eric who did most if not all of the actual real work!
But anyway I hope this version fixes most if not all bugs, I am so ready to finalize v1.1.0 and move on.
I am working from home but here are some live pictures from my WISP office 2 towns over from my home which is about a 25 minute drive away.
CLICK ON IMAGES BELOW TO SEE FULL SIZE
Here is the street out front as seen from an apartment building we own next door to WISP office.
(oh we are in the middle of a small snow storm).
Here is where Rory's car was 15 minutes ago, snow is really starting to fall.
Here is Rory's desk where he has been for the last 11+ hours working with Eric and testing the firmware versions.
I can not show you Eric's desk as I do not have a camera there as he works from home in Canada when he is not down here then he just takes over my office.
In fact the last time he was down here by the time he left it was referred to as "Eric's" office.
Another late night on firmware
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Another late night on firmware
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: Another late night on firmware
sirhc wrote:Well I just finished posting up v1.1.0rc18...
Installing rc18 was uneventful.
I cannot post pics of my UFV cuz it is an alpha and I am under NDA.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Another late night on firmware
Just installed RC18 and it seemed to fix my problem with vlans.
I'll let it run for the night and do some adding and changing of vlans in the morning just to verify things are still good.
Over the last 36 hours my customers attached to the WS and down stream have been up and down several times and at one point for about an hour while I was trying to figure out what was going on.. eerrrm...
Chris, Rory, Eric, thanks for putting in the hours.
I'll let it run for the night and do some adding and changing of vlans in the morning just to verify things are still good.
Over the last 36 hours my customers attached to the WS and down stream have been up and down several times and at one point for about an hour while I was trying to figure out what was going on.. eerrrm...
Chris, Rory, Eric, thanks for putting in the hours.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Another late night on firmware
But we do have a stable non RC version - v1.0.10:
Once v1.1.0 is stable people will have to ask permission to get the newer RC versions and it will be a limited group.
CLICK HERE TO DOWNLOAD FIRMWARE v1.0.10 - Released 1/23/2015 <------------
THIS IS A STABLE FINAL OLDER RELEASE WITHOUT THE NEW FEATURE SETS
CLICK HERE TO DOWNLOAD FIRMWARE v1.1.0rc18 - CURRENTLY UNDER TESTING.
This version has all the new feature sets.
Once v1.1.0 is stable people will have to ask permission to get the newer RC versions and it will be a limited group.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rebelwireless - Experienced Member
- Posts: 607
- Joined: Mon Sep 01, 2014 1:46 pm
- Has thanked: 31 times
- Been thanked: 136 times
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Another late night on firmware
rebelwireless wrote:old aircams?
Yea, pretty nice eh, do you wanna buy them?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rebelwireless - Experienced Member
- Posts: 607
- Joined: Mon Sep 01, 2014 1:46 pm
- Has thanked: 31 times
- Been thanked: 136 times
Re: Another late night on firmware
sirhc wrote:rebelwireless wrote:old aircams?
Yea, pretty nice eh, do you wanna buy them?
oh, no.....I was hoping you would buy my overstock ;)
7 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests