8 Port Mini - Or Look What Fell Off a Truck!
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
sirhc wrote:In about 10 days they will be on our site ready to ship!
Any update about the 8 ports avaibility ? I would like to know if those will be availaible soon cause I must order some 12 and 24 ports units and would order 8 ports at the same time.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
Watch the Forums and web store closely the next 24 to 48 hours 
I got delayed getting the firmware problem that started Friday night until now (I hope) under control.
I got delayed getting the firmware problem that started Friday night until now (I hope) under control.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rkelly1 - Experienced Member
- Posts: 147
- Joined: Wed Aug 20, 2014 10:06 pm
- Location: Clermont, FL
- Has thanked: 12 times
- Been thanked: 27 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
Netonix website or RFArmor website?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
rkelly1 wrote:Netonix website or RFArmor website?
Netonix
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
Well a sad thing happened today.
The decals finally showed up and we discovered they made several mistakes:
The front decals are white and should have been black.
The material was supposed to be lamented and they are not.
The port numbers are not centered on the ports and they are off center a little bit.
Now since this was only a small test batch no big deal but to get replacements would take 2 weeks so we have decided to ship these first 100 switches with the decals as I am sure you guys really do not care that much about that?
Also the 100 pre-production chassis are in but they have some minor changes that need made but no big deal because the changes mostly affect how difficult they go together and you should not be taking them apart!
Also the chassis do not fit exactly perfect on a rear seam but once again not bad and I am sure you do not care that much about that either?
So we will begin assembling them tomorrow and the next batch of 200 in about 3 weeks should be perfect and then 3 weeks after that we receive 1,000 units and those should most definitely be perfect.
I need to get these 100 out there so you guys can decide how much you do or do not like them so we can place the order for the next batch so we need to judge volumes based on your feedback.
Can you guys live with the decal and chassis imperfections for this first batch? I hope to put the switch on the web store for sale in the next 24 hours on a first come first serve but we are going to limit the number per customer as we need to get as much feed back from as many different people as possible.
The decals finally showed up and we discovered they made several mistakes:
The front decals are white and should have been black.
The material was supposed to be lamented and they are not.
The port numbers are not centered on the ports and they are off center a little bit.
Now since this was only a small test batch no big deal but to get replacements would take 2 weeks so we have decided to ship these first 100 switches with the decals as I am sure you guys really do not care that much about that?
Also the 100 pre-production chassis are in but they have some minor changes that need made but no big deal because the changes mostly affect how difficult they go together and you should not be taking them apart!
Also the chassis do not fit exactly perfect on a rear seam but once again not bad and I am sure you do not care that much about that either?
So we will begin assembling them tomorrow and the next batch of 200 in about 3 weeks should be perfect and then 3 weeks after that we receive 1,000 units and those should most definitely be perfect.
I need to get these 100 out there so you guys can decide how much you do or do not like them so we can place the order for the next batch so we need to judge volumes based on your feedback.
Can you guys live with the decal and chassis imperfections for this first batch? I hope to put the switch on the web store for sale in the next 24 hours on a first come first serve but we are going to limit the number per customer as we need to get as much feed back from as many different people as possible.
- front.jpg (645.38 KiB) Viewed 15012 times
- bottom.jpg (566.02 KiB) Viewed 15012 times
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rkelly1 - Experienced Member
- Posts: 147
- Joined: Wed Aug 20, 2014 10:06 pm
- Location: Clermont, FL
- Has thanked: 12 times
- Been thanked: 27 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
Im good since port 5 looks centered 
DC, DC, DC
DC, DC, DC
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
rkelly1 wrote:Im good since port 5 looks centered
DC, DC, DC
I will post a DC version picture tomorrow if you like with the white stickers???
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rkelly1 - Experienced Member
- Posts: 147
- Joined: Wed Aug 20, 2014 10:06 pm
- Location: Clermont, FL
- Has thanked: 12 times
- Been thanked: 27 times
Re: 8 Port Mini - Or Look What Fell Off a Truck!
I'd take white stickers!
White sticker makes it look like a 1980's retro A/B serial switch.
White sticker makes it look like a 1980's retro A/B serial switch.
Who is online
Users browsing this forum: Google [Bot] and 17 guests