Firmware Road Map
- keefe007
- Experienced Member
- Posts: 169
- Joined: Tue Aug 05, 2014 3:56 pm
- Has thanked: 0 time
- Been thanked: 21 times
Re: Firmware Road Map
I sit here refreshing the page just waiting for the new firmware!
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Firmware Road Map
keefe007 wrote:I sit here refreshing the page just waiting for the new firmware!
Being tested right now.
Having issues with Allow all VLANs but hope to have it resolved.
For now to be quick and dirty we just mimicked the TS8 functionality but plan in the future to allow you to specify ranges of allowed VLANs.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- keefe007
- Experienced Member
- Posts: 169
- Joined: Tue Aug 05, 2014 3:56 pm
- Has thanked: 0 time
- Been thanked: 21 times
Re: Firmware Road Map
Thanks for the update.
On a related note, does a firmware update require all POE devices to reboot? It'd be nice to do firmware updates without having to reboot everything.
On a related note, does a firmware update require all POE devices to reboot? It'd be nice to do firmware updates without having to reboot everything.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Firmware Road Map
keefe007 wrote:Thanks for the update.
On a related note, does a firmware update require all POE devices to reboot? It'd be nice to do firmware updates without having to reboot everything.
No firmware updates do not power cycle ports, nor do software UI reboots.
We are thinking about putting in a "RELOAD COLD" that would but for now the only way to make the POE ports cycle power is unplug it or turn them off in the software.
However I really wish people would try the new firmware out on LESS critical easy to access locations if at all possible.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
wayneorack - Experienced Member
- Posts: 129
- Joined: Thu Sep 04, 2014 12:16 pm
- Location: San Angelo, TX
- Has thanked: 188 times
- Been thanked: 64 times
Re: Firmware Road Map
keefe007 wrote:All locations are critical locations. ;)
Well, I have a lot of non critical locations, But... If it is important enough to buy a $500 switch for, it is critical.
-
QuadeHale - Member
- Posts: 27
- Joined: Tue Jan 13, 2015 4:10 pm
- Has thanked: 6 times
- Been thanked: 4 times
Re: Firmware Road Map
Eagerly awaiting simple DHCP snooping. I hate dealing with it on EdgeSwitches.
You guys are doing a great job, thanks =)
You guys are doing a great job, thanks =)
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Firmware Road Map
We plan to release v1.1.0 FINAL this weekend with Keefe007 fix for VLAN Trunking with no additional VLANs defined.
Also being in ST. Louis for the week I have not yet confirmed Josh's issue if we need to fix something there yet.
But anyway as soon as v1.1.0 FINAL is released we will be concentrating on the needed changed to support the DC switches which we are HOPING to start releasing by the end of the month or EARLY April.
SO sometime this month we will start adding features spelled out in the Firmware Road map which I am going to make sure DHCP snooping is listed in there for you.
Also being in ST. Louis for the week I have not yet confirmed Josh's issue if we need to fix something there yet.
But anyway as soon as v1.1.0 FINAL is released we will be concentrating on the needed changed to support the DC switches which we are HOPING to start releasing by the end of the month or EARLY April.
SO sometime this month we will start adding features spelled out in the Firmware Road map which I am going to make sure DHCP snooping is listed in there for you.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
josh - Associate
- Posts: 109
- Joined: Thu Apr 17, 2014 9:29 pm
- Location: USA
- Has thanked: 69 times
- Been thanked: 31 times
Re: Firmware Road Map
Would like to be able to optionally have the Storm Control triggers be a percentage of the overall traffic, such as 10%, 25%, 50%, etc.
Need RADIUS auth for device login to manage the switch (with a backup local admin account).
Ubiquiti Discovery support would be amazing.
LLDP
CDP
Did I mention Ubiquiti Discovery support? If you look on github there's several examples of reverse engineered code.
Replace traceroute with mtr-tiny
Need RADIUS auth for device login to manage the switch (with a backup local admin account).
Ubiquiti Discovery support would be amazing.
LLDP
CDP
Did I mention Ubiquiti Discovery support? If you look on github there's several examples of reverse engineered code.
Replace traceroute with mtr-tiny
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Firmware Road Map
josh wrote:Would like to be able to optionally have the Storm Control triggers be a percentage of the overall traffic, such as 10%, 25%, 50%, etc.
Need RADIUS auth for device login to manage the switch (with a backup local admin account).
Ubiquiti Discovery support would be amazing.
LLDP
CDP
Did I mention Ubiquiti Discovery support? If you look on github there's several examples of reverse engineered code.
Replace traceroute with mtr-tiny
Radius will be done
UBNT and Cisco Discovery will be done
The other two not sure
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: No registered users and 16 guests