Has anyone here had any success powering POE 48v security cameras using a netonix switch?
We have some that normally run off 12v but I was thinking about tidying up the wiring at the customer site by using the netonix that is already there. They advertise 48v POE input on the ethernet cable, or 12v via the barrel connector.
Powering Security Cameras
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Powering Security Cameras
A lot of people use our switches to power security cameras.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jakematic - Experienced Member
- Posts: 168
- Joined: Thu Jul 14, 2016 8:15 am
- Location: NC USA
- Has thanked: 362 times
- Been thanked: 87 times
Re: Powering Security Cameras
Just be careful - there is a BIG difference between 48V and 48VH
The latter lets magic smoke out if the device isn't designed for it.
The latter lets magic smoke out if the device isn't designed for it.
Re: Powering Security Cameras
Awesome, thanks I'll give it a go.
I was worried that one of the official POE formats that the cameras use might be incompatible with the passive POE of the netonix.
I was worried that one of the official POE formats that the cameras use might be incompatible with the passive POE of the netonix.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Powering Security Cameras
Charlie wrote:Awesome, thanks I'll give it a go.
I was worried that one of the official POE formats that the cameras use might be incompatible with the passive POE of the netonix.
Read this post: viewtopic.php?f=6&t=1178#p8809
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: Powering Security Cameras
48V work fine with 802.11af and 802.11at devices.
-
sakita - Experienced Member
- Posts: 206
- Joined: Mon Aug 17, 2015 2:44 pm
- Location: Arizona, USA
- Has thanked: 93 times
- Been thanked: 80 times
Re: Powering Security Cameras
Always verify the pinout of your particular camera.
For example, some Axis P60 series cameras are different.
Be sure because the magic smoke isn't easily replaced
For example, some Axis P60 series cameras are different.
Be sure because the magic smoke isn't easily replaced
Today is an average day: Worse than yesterday, but better than tomorrow.
7 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 47 guests