Radius Authentication

Post a reply
h8r1dx4
Member
 
Posts: 3
Joined: Thu Jan 18, 2018 7:55 am
Has thanked: 1 time
Been thanked: 0 time

Radius Authentication

Mon May 21, 2018 10:11 am

Radius Authentication

Good day

I have a ws-12-dc firmware 1.4.9.
I would like to use radius for authentication to log into the switch.
Is this possible on this device?

I am using Freeradius and it gives me the following error when I try to auth.
Ignoring request to authentication address * port 1812 from unknown client 192.168.0.12 port 44075.

Thank you in advance.
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7415
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: Radius Authentication

Mon May 21, 2018 3:08 pm

If you go to the DEVICE/CONFIGURATION TAB and scroll down you will see a place to configure Radius authentication.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
h8r1dx4
Member
 
Posts: 3
Joined: Thu Jan 18, 2018 7:55 am
Has thanked: 1 time
Been thanked: 0 time

Re: Radius Authentication

Tue May 22, 2018 6:40 am

Hi Sirhc

That is where I did the config.
But I get the following error on the radius server: Ignoring request to authentication address * port 1812 from unknown client 192.168.0.12 port 44075.
I know the radius server is working my Mikrotik devices are authenticating.

Regards,
Top
User avatar
jakematic
Experienced Member
 
Posts: 168
Joined: Thu Jul 14, 2016 8:15 am
Location: NC USA
Has thanked: 362 times
Been thanked: 87 times

Re: Radius Authentication

Tue May 22, 2018 8:12 am

h8r1dx4 wrote:Ignoring request to authentication address * port 1812 from unknown client 192.168.0.12 port 44075.
I know the radius server is working my Mikrotik devices are authenticating.


This would suggest that the switch is not defined in /etc/freeradius/clients.conf
Top
h8r1dx4
Member
 
Posts: 3
Joined: Thu Jan 18, 2018 7:55 am
Has thanked: 1 time
Been thanked: 0 time

Re: Radius Authentication

Wed May 23, 2018 1:11 am

I use a mysql database and the device is defined in the nas table. Just like the working Mikrotik devices.
Top
Post a reply
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 33 guests