Hello All,
why if I set on port FC to none I continue to see the count of RX pause frames increase ? on that port is connected an AF5X in mid span.
Thank you in advance.
Flow Control set on none but Frames pause increases
- f.cucci@el-com.it
- Member
- Posts: 20
- Joined: Thu Sep 15, 2016 6:16 am
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Flow Control set on none but Frames pause increases
Just because you turn Flow Control OFF on the switch port does not mean the AF may still not send Pause Frames (even though it should not) and if the switch receives one it will record that it received it even though it will not act on it.
UBNT has been struggling with FC for awhile.
I would turn Flow Control OFF on the AF radio.
UBNT has been struggling with FC for awhile.
I would turn Flow Control OFF on the AF radio.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 47 guests