Hello,
What are the operational temperature ranges for the Board, CPU, and PHY?
I'm setting up some SNMP monitoring and wanting to know what expected thresholds should be set to for each "tempDescription".
Thanks,
Duane
Temperature Ranges
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Temperature Ranges
I used the "advanced" search feature by clicking on the magnifying glass in the search box
Search for keywords: +temp +phy +cpu
Search for author: sirhc
A few results:
viewtopic.php?f=6&t=2855&p=19976&hilit=+temp+phy+cpu#p19976
viewtopic.php?f=6&t=2527&p=17715&hilit=+temp+phy+cpu#p17715
viewtopic.php?f=17&t=2413&p=16997&hilit=+temp+phy+cpu#p16997
Search for keywords: +temp +phy +cpu
Search for author: sirhc
A few results:
viewtopic.php?f=6&t=2855&p=19976&hilit=+temp+phy+cpu#p19976
viewtopic.php?f=6&t=2527&p=17715&hilit=+temp+phy+cpu#p17715
viewtopic.php?f=17&t=2413&p=16997&hilit=+temp+phy+cpu#p16997
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
dcox - Member
- Posts: 27
- Joined: Sat Nov 07, 2015 8:33 pm
- Location: Champaign, IL
- Has thanked: 5 times
- Been thanked: 2 times
Re: Temperature Ranges
Thanks Chris:
I was able to do some reading and get some good high threshold values for CPU, PHY and Board. (125C, 125C, and 90C)
Do you guys have any unsafe low values?
It might seem silly, but I've seen hardware fail to perform properly (not permanent failure) due to too low of temps.
I've seen power supplies, power regulators, etc puke if they get too cold.
Even our CMTS will have issues if the ambient air is too cold, etc.
Thanks,
Duane
I was able to do some reading and get some good high threshold values for CPU, PHY and Board. (125C, 125C, and 90C)
Do you guys have any unsafe low values?
It might seem silly, but I've seen hardware fail to perform properly (not permanent failure) due to too low of temps.
I've seen power supplies, power regulators, etc puke if they get too cold.
Even our CMTS will have issues if the ambient air is too cold, etc.
Thanks,
Duane
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Temperature Ranges
If our switch is running as the ambient temperature drops below the stated operating temperature range there is no issue.
If the switch is OFF and you attempt a "cold start" below the stated operating temperature range it is possible the switch will not start properly.
Operating Temperature -25 to 55°C (-13 to 131° F)
People are using these in Alaska and have heard of no issues with COLD.
If the switch is OFF and you attempt a "cold start" below the stated operating temperature range it is possible the switch will not start properly.
Operating Temperature -25 to 55°C (-13 to 131° F)
People are using these in Alaska and have heard of no issues with COLD.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
4 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 26 guests