Ok I have a few prism Gen2 we have installed on our network in mixed mode as we are upgrading our clients, i have noticed that once we have at least 2 clients on AC gear and the rest maybe 15 clients on old N Gear still the gen2 radio will push 20.3watts not just once in awhile but quite abit.. on the gen2's that have only N clients still the wattage looks completely normal maxing around 13-14 watts the amount of traffic flowing and which direction seems to not matter,, It will push 45mbs on tx meaning download to the clients and the wattage stays normal and then just out of the blue it will spike,, and throughput will just be normal 20mbs..
any ideas or am i just worried for no reason? I only ask because one of the radios we have doing this has dropped connection 13 times in the middle of the night all of a sudden and now i have some upset customers.
Prism Gen2 power
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Prism Gen2 power
Put up screen grabs of the following TABs
Status - have the power graph selected on the bottom showing power consumption on the port your talking about.
Device/Status
Status - have the power graph selected on the bottom showing power consumption on the port your talking about.
Device/Status
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- vnce
- Member
- Posts: 25
- Joined: Mon Apr 27, 2015 10:35 pm
- Location: Eastern Idaho
- Has thanked: 0 time
- Been thanked: 4 times
Re: Prism Gen2 power
I am attaching a few screen shots, I just watched it for a couple min here, but as of right now the max is 19.7, as you can see its not passing a ton of traffic at that wattage and i have one where its sending 30 some mbs and the wattage is normal.
- Attachments
-
-
-
-
Last edited by vnce on Mon Jan 08, 2018 9:06 pm, edited 3 times in total.
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Prism Gen2 power
OK We can not see your pictures.
PLEASE follow the instructions in my post signature on how to upload pictures
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON
Go back and "edit" your post and upload the pictures properly please
PLEASE follow the instructions in my post signature on how to upload pictures
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON
Go back and "edit" your post and upload the pictures properly please
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Prism Gen2 power
sirhc wrote:Put up screen grabs of the following TABs
Status - have the power graph selected on the bottom showing power consumption on the port your talking about.
Device/Status
When I asked for the Status TAB and display the Power Usage Graph this is what I wanted to see
CLICK IMAGE BELOW TO VIEW FULL SIZE
Note: that I placed the image in line after I uploaded and then added the text above about clicking on it.
CLICK IMAGE BELOW TO VIEW FULL SIZE
Note: that I placed the image in line after I uploaded and then added the text above about clicking on it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- vnce
- Member
- Posts: 25
- Joined: Mon Apr 27, 2015 10:35 pm
- Location: Eastern Idaho
- Has thanked: 0 time
- Been thanked: 4 times
Re: Prism Gen2 power
ok its spiking less now as we have completed the upgrade today on all clients associated with the sector and it is no longer in mixed mode, so sorry i didnt get the images you wanted from before.
also i am aware of the errors they are caused when the ap would be rebooted while clients were passing traffic (call center trying to be helpful), also it hasn't gotten a new error in 2 days as no one is allowed to reboot with out permission. , cable tested out and has been inspected.. there were no errors on the rocket N we had on this as well.
also i am aware of the errors they are caused when the ap would be rebooted while clients were passing traffic (call center trying to be helpful), also it hasn't gotten a new error in 2 days as no one is allowed to reboot with out permission. , cable tested out and has been inspected.. there were no errors on the rocket N we had on this as well.
- Attachments
-
-
-
- vnce
- Member
- Posts: 25
- Joined: Mon Apr 27, 2015 10:35 pm
- Location: Eastern Idaho
- Has thanked: 0 time
- Been thanked: 4 times
Re: Prism Gen2 power
Just an update from us,, it looks like we had a new prism gen 2 have an issue,, I cant tell you what the issue is with it but we decided to replace the prism, and have had zero errors and power usage is normal again.. on the other ones that are spiking it seems to only spike like that when they are in mixed mode, once we completed upgrades on our client side to full AC the power spikes have stabilized..
this is only on the Gen 2 equipment the original Prism does not have this issue
this is only on the Gen 2 equipment the original Prism does not have this issue
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Prism Gen2 power
Make sure you BOND the electrical service ground rods to the tower ground rods with heavy #2 wire. <= VERY IMPORTANT
If the electrical service is older I would add 1 ro 2 NEW ground rods to existing electrical service ground rods. <= VERY IMPORTANT
Here are some good posts on grounding:
http://forum.netonix.com/viewtopic.php? ... 279#p19279
http://forum.netonix.com/viewtopic.php?f=30&t=1816
http://forum.netonix.com/viewtopic.php?f=30&t=188
http://forum.netonix.com/viewtopic.php? ... =30#p13447
http://forum.netonix.com/viewtopic.php?f=30&t=1429
If the electrical service is older I would add 1 ro 2 NEW ground rods to existing electrical service ground rods. <= VERY IMPORTANT
Here are some good posts on grounding:
http://forum.netonix.com/viewtopic.php? ... 279#p19279
http://forum.netonix.com/viewtopic.php?f=30&t=1816
http://forum.netonix.com/viewtopic.php?f=30&t=188
http://forum.netonix.com/viewtopic.php? ... =30#p13447
http://forum.netonix.com/viewtopic.php?f=30&t=1429
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
8 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 25 guests