Prism Gen 2 Power setting?
- webmaster@dasia.net
- Member
- Posts: 2
- Joined: Wed Nov 01, 2017 11:37 am
- Has thanked: 0 time
- Been thanked: 1 time
Prism Gen 2 Power setting?
What POE setting do I use for powering a Prism Gen 2 ?
-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Prism Gen 2 Power setting?
webmaster@dasia.net wrote:What POE setting do I use for powering a Prism Gen 2 ?
Read this post: viewtopic.php?f=6&t=1178#p8809
"All" airMAX radios use 24V except for one model which was the Titanium which used 48V
Using anything other than 24V on airMAX will result in SMOKE - POOF (Except Titanium as mentioned above)
Just about anything you want to know is available on the forums with a search
Everyone should read the Announcement Threads at the TOP of Each Forum.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- webmaster@dasia.net
- Member
- Posts: 2
- Joined: Wed Nov 01, 2017 11:37 am
- Has thanked: 0 time
- Been thanked: 1 time
Re: Prism Gen 2 Power setting?
I spent hours going through the forums and got a wealth of information regarding this and great discussions regarding grounding and got more confused regarding the Prism (long day). Better to ask and look stupid than to be stupid and not ask, SMOKE-POOF no fun. Thank you very much 
Great product! Makes Mimosa B5c's & B11's worth having.
Great product! Makes Mimosa B5c's & B11's worth having.-
sirhc - Employee
- Posts: 7419
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Prism Gen 2 Power setting?
webmaster@dasia.net wrote:I spent hours going through the forums and got a wealth of information regarding this and great discussions regarding grounding
webmaster@dasia.net wrote:Better to ask and look stupid than to be stupid and not ask, SMOKE-POOF no fun.
webmaster@dasia.net wrote:Great product! Makes Mimosa B5c's & B11's worth having.
Groundings recap /tips:
I always add 1 or 2 NEW grounding rods to older existing electrical services and clean up and corrosion
If electrical service ground rods are too far from tower then follow this post:
viewtopic.php?f=17&t=1786&start=30#p13447
Make sure you run a heavy #2 ground bonding wire between electrical service ground rods and tower ground rods.
Earth Ground current is the #1 cause of WISP equipment damage NOT ESD and surges.
We also repair UBNT and MIMOSA radios and we see the same damage to those units as our switches when there is poor grounding.
For info on repairing UBNT and MIMOSA radios read this post:
viewtopic.php?f=21&t=2827#p19482
Here are some good posts on grounding:
viewtopic.php?f=30&t=2786&p=19279#p19279
viewtopic.php?f=30&t=1816
viewtopic.php?f=30&t=188
viewtopic.php?f=17&t=1786&start=30#p13447
viewtopic.php?f=30&t=1429
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
4 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 24 guests