Netonix Manager / Control Software

User avatar
jjonsson
Associate
Associate
 
Posts: 337
Joined: Wed Nov 05, 2014 12:30 pm
Location: Denmark
Has thanked: 37 times
Been thanked: 65 times

Re: Netonix Manager / Control Software

Thu Sep 07, 2017 6:35 pm

Eric Stern wrote:Adding a filter option is on my list of things to do. That will allow you to reduce the number of switches currently being displayed.


In my opinion a combination of tabs (for sites) and filter would be better....

User avatar
Eric Stern
Employee
Employee
 
Posts: 532
Joined: Wed Apr 09, 2014 9:41 pm
Location: Toronto, Ontario
Has thanked: 0 time
Been thanked: 130 times

Re: Netonix Manager / Control Software

Wed Sep 13, 2017 2:15 pm

Published 1.0.6. See the first post in this thread to get it.

User avatar
ryanm
Member
 
Posts: 63
Joined: Tue Jul 29, 2014 11:00 pm
Has thanked: 36 times
Been thanked: 16 times

Re: Netonix Manager / Control Software

Wed Sep 13, 2017 11:00 pm

I used the update button inside of the lit-up question mark. Post-upgrade, I was unable to get the interface to load. The login page would proceed to the main screen but immediately reload the login page.
I re-installed 1.0.5

User avatar
Eric Stern
Employee
Employee
 
Posts: 532
Joined: Wed Apr 09, 2014 9:41 pm
Location: Toronto, Ontario
Has thanked: 0 time
Been thanked: 130 times

Re: Netonix Manager / Control Software

Thu Sep 14, 2017 10:10 am

You might need to clear the browser cache post-upgrade.

User avatar
WisTech
Associate
Associate
 
Posts: 213
Joined: Mon Aug 04, 2014 3:57 pm
Has thanked: 8 times
Been thanked: 64 times

Re: Netonix Manager / Control Software

Thu Sep 14, 2017 12:43 pm

Went to upgrade from 1.0.5, to 1.0.6 via UI, and it never came back. Restarted the VM and still nothing. Will try and update manually.

User avatar
WisTech
Associate
Associate
 
Posts: 213
Joined: Mon Aug 04, 2014 3:57 pm
Has thanked: 8 times
Been thanked: 64 times

Re: Netonix Manager / Control Software

Thu Sep 14, 2017 12:51 pm

Updated from 1.0.5 to 1.0.6 manually, web service starts, go to log in, then nothing. Apparently doing this kills the service.

User avatar
WisTech
Associate
Associate
 
Posts: 213
Joined: Mon Aug 04, 2014 3:57 pm
Has thanked: 8 times
Been thanked: 64 times

Re: Netonix Manager / Control Software

Thu Sep 14, 2017 1:03 pm

K, had to sudo rm -R /opt/netonix-manager then dpkg -i to get it going again. db is obviously stored elsewhere because it came online and is backing up switch configs (THANK YOU!).

User avatar
sakita
Experienced Member
 
Posts: 206
Joined: Mon Aug 17, 2015 2:44 pm
Location: Arizona, USA
Has thanked: 92 times
Been thanked: 80 times

Re: Netonix Manager / Control Software

Thu Sep 14, 2017 1:48 pm

Update failed (on Windows server). Web page said "something bad happened :("

After restarting service Chrome said "This page isn't working" ERR_EMPTY_RESPONSE"

Downloaded new version and installed on server and all is well again... plus now have backups of all configs! :hurray:
Today is an average day: Worse than yesterday, but better than tomorrow.

User avatar
Eric Stern
Employee
Employee
 
Posts: 532
Joined: Wed Apr 09, 2014 9:41 pm
Location: Toronto, Ontario
Has thanked: 0 time
Been thanked: 130 times

Re: Netonix Manager / Control Software

Thu Sep 14, 2017 7:31 pm

There was a problem with the 1.0.6 self update. I've uploaded a new build and it should be ok now. Uninstalling/reinstalling will fix it if you tried the self update but it failed.

Viv
Member
 
Posts: 12
Joined: Sat Aug 26, 2017 12:18 pm
Has thanked: 2 times
Been thanked: 1 time

Re: Netonix Manager / Control Software

Fri Sep 15, 2017 4:34 am

I am using CentOS and I tried to upgrade first auto and then as suggested manually.

But the problem I faced is same as others it is to going login page and then after providing username name and password showing main.html (only for sec)and again redirecting to login page. I cleared browser cache as well.

I noticed on manual as well as automatic upgrade my install dir i.e /opt/netonix-manager permissions are messed up it is showing owner as 544 and group as 513.

Something is bad. Please respond

PreviousNext
Return to General Discussion

Who is online

Users browsing this forum: No registered users and 8 guests