Installed a new WS-6 Mini this morning. It's 106 Degrees outside but we routinely get temps up to 122f (Like last week). Should I be worried? Bad unit? I read somewhere that the cpu temps sensors have a pretty wide range so it could be off?
I have about a dozen of these outside in the same boxes pulling around the same wattage and they don't get nearly as hot. Hottest one on the network besides this one is at 107C right now.
Not sure why the CPU says - (minus). It was around 126 a few min ago before I did the screenshot.
Thanks
WS6-Mini Running Hot!
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS6-Mini Running Hot!
I would install vents in the box
One high and one low to allow air flow
http://www.mouser.com/ProductDetail/Bud ... swodaDoNDg
One high and one low to allow air flow
http://www.mouser.com/ProductDetail/Bud ... swodaDoNDg
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- Xtremewave
- Member
- Posts: 14
- Joined: Wed Oct 01, 2014 4:24 pm
- Location: Baytree Alberta Canada
- Has thanked: 6 times
- Been thanked: 0 time
Re: WS6-Mini Running Hot!
Quick question, on your mini noticed you have 24V regular on port 2. how is this possible as all my mini's are 24HV or 48HV??
-
jakematic - Experienced Member
- Posts: 168
- Joined: Thu Jul 14, 2016 8:15 am
- Location: NC USA
- Has thanked: 362 times
- Been thanked: 87 times
Re: WS6-Mini Running Hot!
Per this thread: viewtopic.php?f=21&t=2699&p=18867&hilit=mini+24v#p18867
I had the same question before ordering mine.
Dave wrote:current production ws-6 Port 2 has 24/48/48VH options....just no 24VH...sigh..we need to update data sheet..
I had the same question before ordering mine.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS6-Mini Running Hot!
We removed 24VH and added 24V and 48V as the only radio on the market that needs 24VH currently is Ignite Metrolink which has been shown to work with our 24V
If you want to power an AFX radio then use 48VH on port 2 as talked about in this post
viewtopic.php?f=6&t=1215#p9040
More people wanted 24V on port 2 then 24VH and if you used 24VH on an airMAX radio it went POOF
If you want to power an AFX radio then use 48VH on port 2 as talked about in this post
viewtopic.php?f=6&t=1215#p9040
More people wanted 24V on port 2 then 24VH and if you used 24VH on an airMAX radio it went POOF
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 21 guests