Well I would always use a mid-span injector configuration using 2 switch ports for any backhaul links. Never run traffic through the same interface to the router as traffic going from router to local radios on the tower such as APs and private PTP links such as high end customers.
I give this same advice in this post:
viewtopic.php?f=17&t=2604&p=18261&hilit=+local+radios#p18261
Review this post: viewtopic.php?t=1654&p=12766#p12766
And review this thread: viewtopic.php?f=30&t=452
And watch the video here: https://www.youtube.com/watch?v=8JvBEAD4MFM
As far as MT routers I I have no experience with as we use Cisco routers at my WISP, a Cisco 2951 at each tower.
VLANS, bonded interfaces, Netonix and Mikrotik
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLANS, bonded interfaces, Netonix and Mikrotik
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: VLANS, bonded interfaces, Netonix and Mikrotik
Ok Chris you recommend doing the link aggregation with two switch this aggregation that we intend to perform is backhaul links from the main point towards the distribution towers
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: VLANS, bonded interfaces, Netonix and Mikrotik
jg0007 wrote:Ok Chris you recommend doing the link aggregation with two switch this aggregation that we intend to perform is backhaul links from the main point towards the distribution towers
That is not what I said in any of those post / links above? - RE-READ ABOVE
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: VLANS, bonded interfaces, Netonix and Mikrotik
Hello I have echo link aggregation (two Airfiber links) now as I can access the arrivals that are in the aggregation
I have cables connected in the port of manager of each airfiber until the ports of the netonix in each ends
I have cables connected in the port of manager of each airfiber until the ports of the netonix in each ends
Who is online
Users browsing this forum: No registered users and 31 guests