OK, I searched, and searched and could not find anything about this before I get my head chewed off.
I have a WS6mini powered by a WS-12-250AC
I have been running cameras and a nanobeam for several months.
Today I noticed 2 cameras are down, They have no POE applied (off), when I try to select a voltage the drop down items are greyed out.
Any ideas?
Thanks
Dave
WS6 Mini Unable to select voltage
-
canpandave - Member
- Posts: 45
- Joined: Thu Mar 26, 2015 6:28 pm
- Location: Edmonton, AB CANADA
- Has thanked: 0 time
- Been thanked: 4 times
-
canpandave - Member
- Posts: 45
- Joined: Thu Mar 26, 2015 6:28 pm
- Location: Edmonton, AB CANADA
- Has thanked: 0 time
- Been thanked: 4 times
Re: WS6 Mini Unable to select voltage
btw, there have been no changes except I upgraded the WS6 Mini to the latest 1.4.7rc8
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS6 Mini Unable to select voltage
Try downgrading and see what happens, could be a missed bug in rc8?
A greyed out POE option should only occur if the port has a link already as why would you want to apply POE to a port that has a link?
A greyed out POE option should only occur if the port has a link already as why would you want to apply POE to a port that has a link?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
petecarlson - Experienced Member
- Posts: 107
- Joined: Thu Aug 28, 2014 7:04 pm
- Location: Baltimore, MD
- Has thanked: 15 times
- Been thanked: 10 times
Re: WS6 Mini Unable to select voltage
On a WS-6MINI upgrade from 1.4.2 to 1.4.7rc8 I am not seeing this issue. This is on a pretty default WS-6MINI powered by a WS-12-250AC. No POE was set on the WS-6 before the upgrade and nothing is connected to it besides the cable from the 12-250
CP
CP
- Julian
Re: WS6 Mini Unable to select voltage
could just be coincidence- will attempt to duplicate when time allows,
what flavor of firmware had you been using?
what flavor of firmware had you been using?
Last edited by Julian on Thu Feb 09, 2017 4:13 pm, edited 2 times in total.
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: WS6 Mini Unable to select voltage
I have PoE on ports 2 through 5 on my MINI running the latest RC8 powering 3 cams and a UAP. Not seeing an issue.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS6 Mini Unable to select voltage
Try a factory default then manually setup
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
7 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 39 guests