WS-24-400A LACP flapping
-
joshua.powell@rocketcommtech.com - Member
- Posts: 1
- Joined: Sat Jul 25, 2015 9:54 pm
- Location: Bartonville, IL
- Has thanked: 0 time
- Been thanked: 0 time
WS-24-400A LACP flapping
I'm having an issue where the port(s) on the switch flap from LACP ACTIVE to NOT ACTIVE. I can't seem to find a cause. I've changed SFPs and jumpers. Even tried generic SFPs. Still does it. After a cold boot it runs OK until there are about 200 packets sent through the port at which point it starts flapping and I see excessive packet loss. Any ideas?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-24-400A LACP flapping
Maybe provide some more information.
What firmware version are you running?
You have an LACP LAG between 2 WS-24-400A?
What firmware version are you running?
You have an LACP LAG between 2 WS-24-400A?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 38 guests