Format options for Access Control?
Looked for docs on this but found nothing.
Does it support only single IP or can we use CIDR formatting?
Looking for a few examples before getting locked out.
Access control format options
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Access control format options
CLICK IMAGE BELOW TO VIEW FULL SIZE
So you can enter a single address: 178.75.52.2
Or an entire subnet, in this case an entire Class C: 178.75.52.0/24
Most input fields in the UI that are anything above 1st grade usually have a mouse over help balloon with examples.
So you can enter a single address: 178.75.52.2
Or an entire subnet, in this case an entire Class C: 178.75.52.0/24
Most input fields in the UI that are anything above 1st grade usually have a mouse over help balloon with examples.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sporkman - Member
- Posts: 86
- Joined: Mon Jul 27, 2015 7:03 pm
- Location: New York, NY
- Has thanked: 8 times
- Been thanked: 11 times
Re: Access control format options
Just a note that if you take that tooltip literally, you'll get an error.
You cannot do something like "192.168.230.0/24, 192.168.240/27, 10.2.100.0/24" and label it something like "private blocks".
The tooltip suggests commas as a separator, but that's not the case, it's a list of individual examples that have to be entered one per line (was this close to debugging the JS to see why it wasn't allowing my input :) )
I'd suggest adding "one entry per line" or something be added there.
Also it is kind of awful UX to hide this in a tooltip (don't take my word for it, hire a UX engineer). A "?" icon would be so much more obvious and intuitive.
You cannot do something like "192.168.230.0/24, 192.168.240/27, 10.2.100.0/24" and label it something like "private blocks".
The tooltip suggests commas as a separator, but that's not the case, it's a list of individual examples that have to be entered one per line (was this close to debugging the JS to see why it wasn't allowing my input :) )
I'd suggest adding "one entry per line" or something be added there.
Also it is kind of awful UX to hide this in a tooltip (don't take my word for it, hire a UX engineer). A "?" icon would be so much more obvious and intuitive.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 23 guests