WS-12-250-DC with all different radio combinations.

[tcknudson]

You sweat profusely plugging in expensive radios without some affirmation that all will be ok,
But these are all in, all powered through the switch,

Airfiber 24
SAF 11 gig
Dragonwave compact 18
Cambium 450AP (with power crossover Cable)
Cambium AP100's (with power crossover cables)

[sirhc]

Nice, thanks for posting, and in the right section!

Well I "hope" you plugged them in with POE turned OFF on the ports and then in the UI turned the POE on for each port that way POE Smart could at least catch a shorted cable and not fry the port and or the radio?

Would be nice if you could put up a screen grab that has the header area and maybe also the Device/Status Tab?

[tcknudson]

[sirhc]

Looks great and thanks for the GREAT write up!

When you get a chance I would upgrade to v1.4.5rc8

FIXED/CHANGED
- Ignore the SFP ports when checking Priority values - rc4
- Changed throttle limits between switch core and CPU - rc4
- Fixed web UI login only using the first 8 characters of the password - rc4
- Removed Address from MODBUS configuration - rc4
- Fixed reset button on WS-6-MINI broken since v1.4.1 - rc6
- Fixed web UI display for mobile devices - rc8

ENHANCEMENTS
- Added ability to configure QoS based on packet headers (MAC, IP, TCP ports, etc) - rc6
- Added support for Mikrotik S-RJ01 SFP module - rc6
- Show the SFP model number in UI - rc6
- Skip PoE watchdog if PoE is not turned on for a port - rc7
- Changed default Revert Timer value from 60 to 180 seconds - rc7
- Added range for DSCP and PCP values in QoS rules - rc7
- Removed DSCP and PCP mappings from QoS config - rc7

Released 10/31/2016 - rc8
Released 10/21/2016 - rc7
Released 10/18/2016 - rc6
Released 10/10/2016 - rc4
Released 9/21/2016 - rc2
Released 9/19/2016 - rc1

[Rebel87]

Good to see a fellow Knud on the forum. Although mine is spelled sen haha