Storm Control Settings
- keefe007
- Experienced Member
- Posts: 169
- Joined: Tue Aug 05, 2014 3:56 pm
- Has thanked: 0 time
- Been thanked: 21 times
Storm Control Settings
What are the recommended storm control settings in terms of PPS?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Storm Control Settings
That is an open ended question and based on your network.
For instance I have a completely routed network and never leave customers have layer 2 access to my network so I have it disabled.
If you have a small or large flat segment will make a difference to the values you use.
I would Google each type of traffic and learn what they all do and how much traffic of each type would be normal for your network based on your normal traffic levels then add maybe 50^ or even double the value.
But that would be me, everyone runs their networks differently and has a different topology so this is not easily answered as a one size fits all.
For instance I have a completely routed network and never leave customers have layer 2 access to my network so I have it disabled.
If you have a small or large flat segment will make a difference to the values you use.
I would Google each type of traffic and learn what they all do and how much traffic of each type would be normal for your network based on your normal traffic levels then add maybe 50^ or even double the value.
But that would be me, everyone runs their networks differently and has a different topology so this is not easily answered as a one size fits all.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Storm Control Settings
Storm control is based on the number of packets on a physical interface and so is not affected by VLANs.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: Storm Control Settings
It is by port though - not total on switch correct?
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: Storm Control Settings
So how long does it block for? Or just until that limit reduces?
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: Storm Control Settings
Is there a way on the switch to see the current number of unicast broadcast etc packets going through?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Storm Control Settings
mhoppes wrote:So how long does it block for? Or just until that limit reduces?
It indiscriminately drops any packets over the specified storm limit.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Storm Control Settings
mhoppes wrote:Is there a way on the switch to see the current number of unicast broadcast etc packets going through?
That would be a nice feature if Eric could do it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
10 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 28 guests