I preconfigured some hardware, and have lost the IP for the Netonix. Is there an easy way to find an IP address (through some discovery mechanism perhaps), or do I just need to reset the switch?
[I installed it at a new small repeater site today, and everything is working as configured, I just cannot get into the switch. I'd rather not have to go on site to reset and reconfigure it, but maybe that will teach me not to take poor notes...]
Thank you - Chris
How to Find IP Address?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: How to Find IP Address?
Well if you have kept the firmware updated and enabled UDP, or LLD, or CDP you can discover it via those discovery programs.
If it is a model with a console port you can use the console port
If you look at your router ARP/MAC table you should be able to find it there as well
Many ways to find a network device
If it is a model with a console port you can use the console port
If you look at your router ARP/MAC table you should be able to find it there as well
Many ways to find a network device
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- uberdome
- Experienced Member
- Posts: 127
- Joined: Thu Sep 08, 2016 6:58 am
- Has thanked: 3 times
- Been thanked: 11 times
Re: How to Find IP Address?
It's a WS-6-MINI, so no console. It looks like I just messed up some configuration somewhere. I can't find a Netonix MAC (EC:...) in any of the bridging / ARP tables of any of the connected devices. I'll go on-site and reconfigure it tomorrow.
Thank you.
Thank you.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 48 guests