Heavy duty radome
Heavy duty radome
So what's the primary reason for this? I'll be putting up a new 3.65 link and getting the full kit. We're right on the coast and get crazy wind and a boatload of rain. Is the extra thickness just to prevent physical things from blowing into it and breaking the radome?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Heavy duty radome
Some people wanted a thicker stronger radome so I did it for them.
Trade off is 1 dB of loss compared to 0 dB with our normal one.
In 5 years at my WISP I have had to replace 1 radome in service which I suspect got hit by a bird after 4 years and it was dried out so it cracked easily.
Trade off is 1 dB of loss compared to 0 dB with our normal one.
In 5 years at my WISP I have had to replace 1 radome in service which I suspect got hit by a bird after 4 years and it was dried out so it cracked easily.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
isaacu - Member
- Posts: 25
- Joined: Wed Dec 23, 2015 1:37 pm
- Location: Southern Illinois
- Has thanked: 0 time
- Been thanked: 0 time
Re: Heavy duty radome
Ive had several covers fail after over the past 3 years. Perhaps it's something in the good-ole Southern Illinois air, but they seem to make great bird houses and in one case a gigantic wasp nest.
That being said, what's the best way to procure some replacements?
That being said, what's the best way to procure some replacements?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Heavy duty radome
https://www.rfarmor.com/index.php/dish- ... rf235.html
https://www.rfarmor.com/index.php/dish-kits/udrf5.html
https://www.rfarmor.com/index.php/nanob ... nbr25.html
https://www.rfarmor.com/index.php/dish-kits/udrf5.html
https://www.rfarmor.com/index.php/nanob ... nbr25.html
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
4 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests