The netonix DC POE switches are very nice, the only problem I have seen is a somewhat high self power consumption. Am I the only person having this issue?.
Can someone tell me how to lower self power consumption?
Thanks
Power consumption of DC switch
-
lojasyst - Member
- Posts: 1
- Joined: Sat Nov 14, 2015 4:33 pm
- Location: Ecuador, Peru, Mexico
- Has thanked: 0 time
- Been thanked: 0 time
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: Power consumption of DC switch
they will use about 4-6 watts themselves...which is not really a lot of power considering what they do.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Power consumption of DC switch
3-6 watts is pretty low.
6 watts if you're using all the ports and the fan is running at full.
This is an Enterprise/Entry Level Carrier switch core which will consume more power than say a Broadcom BCM-53118 or BCM-53115 which is used in the TR8 & TS5 as it is defined by Broadcom as a switch core designed for a SOHO application. But between the BCM-53118 paired up with the AR7240 SOC chip that runs it's UI combined uses close to 4-5 watts without a fan.
So in reality our switch core will use less power at idle but will draw more power when under load passing all those packets you need passed "fast"
I know everyone wants a car that performs like a 4x4 crew cab but sips gas like a Fiat.
6 watts if you're using all the ports and the fan is running at full.
This is an Enterprise/Entry Level Carrier switch core which will consume more power than say a Broadcom BCM-53118 or BCM-53115 which is used in the TR8 & TS5 as it is defined by Broadcom as a switch core designed for a SOHO application. But between the BCM-53118 paired up with the AR7240 SOC chip that runs it's UI combined uses close to 4-5 watts without a fan.
So in reality our switch core will use less power at idle but will draw more power when under load passing all those packets you need passed "fast"
I know everyone wants a car that performs like a 4x4 crew cab but sips gas like a Fiat.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 41 guests