Netonix Manager / Control Software
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Netonix Manager / Control Software
Kinda looks like the old code. Try uninstalling the package and then reinstalling rc8?
-
MichaelBrandl - Member
- Posts: 29
- Joined: Mon Sep 21, 2015 11:15 am
- Location: Hampshire, UK
- Has thanked: 4 times
- Been thanked: 2 times
Re: Netonix Manager / Control Software
When adding a device in with a non standard SSH Port, once you have added the device, you need to then go back into the device again to change the SSH Port as it reverts back to 22,
-
MichaelBrandl - Member
- Posts: 29
- Joined: Mon Sep 21, 2015 11:15 am
- Location: Hampshire, UK
- Has thanked: 4 times
- Been thanked: 2 times
Re: Netonix Manager / Control Software
MichaelBrandl wrote:This was all looking good for around the first 10-15 Devices added, then it froze and now it just displays the first two entries only, however I have had email alerts about the devices, and I cannot re-add them, so they must still be present.
Has anyone else had a similar thing? I am running this on a Ubuntu Server.
I managed to resolve this issue by not monitoring any Switches running 1.2.4 and refreshing the page. I will now upgrade them and then re-monitor, just in case anyone else has this issue.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Netonix Manager / Control Software
MichaelBrandl wrote:MichaelBrandl wrote:This was all looking good for around the first 10-15 Devices added, then it froze and now it just displays the first two entries only, however I have had email alerts about the devices, and I cannot re-add them, so they must still be present.
Has anyone else had a similar thing? I am running this on a Ubuntu Server.
I managed to resolve this issue by not monitoring any Switches running 1.2.4 and refreshing the page. I will now upgrade them and then re-monitor, just in case anyone else has this issue.
Yea, you should at least have v1.3.9 to use the Manager properly.
However v1.4.2rc6 is very stable and fixes several important bugs found in v1.4.0 and v1.4.1
v1.4.2rc will soon go FINAL
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
nriedman - Member
- Posts: 10
- Joined: Wed May 13, 2015 2:59 pm
- Location: Greenfield, IN
- Has thanked: 0 time
- Been thanked: 3 times
Netonix Manager not showing all devices
I very much appreciate the netonix manager application for firmware upgrades. It certainly saves me a lot of scripting time and maintenance. I have experienced one problem with it at this point. Not all devices will show on the devices tab. I have over 20 switches but at the moment only 3 show up. They are in the database because I show the devices added in the log and I cannot add the same ip again as it states it already exists.
I have tried chrome and firefox with the same result. I have also reinstalled netonix manager and node.js but the database still stays (I cannot determine where the info is located because when I reinstall, everything is still there).
Any ideas?
I have tried chrome and firefox with the same result. I have also reinstalled netonix manager and node.js but the database still stays (I cannot determine where the info is located because when I reinstall, everything is still there).
Any ideas?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Netonix Manager not showing all devices
nriedman wrote:I very much appreciate the netonix manager application for firmware upgrades. It certainly saves me a lot of scripting time and maintenance. I have experienced one problem with it at this point. Not all devices will show on the devices tab. I have over 20 switches but at the moment only 3 show up. They are in the database because I show the devices added in the log and I cannot add the same ip again as it states it already exists.
I have tried chrome and firefox with the same result. I have also reinstalled netonix manager and node.js but the database still stays (I cannot determine where the info is located because when I reinstall, everything is still there).
Any ideas?
I moved your post into the proper thread.
What install - Linux or Windows?
What version are you running?
Eric had suggested a fresh install after one of the version changes instead of the on-line upgrade?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike@surfglobal.net - Member
- Posts: 16
- Joined: Wed Feb 17, 2016 8:24 pm
- Location: St. Albans, VT
- Has thanked: 0 time
- Been thanked: 0 time
Re: Netonix Manager / Control Software
I am trying to install the latest software on a debian machine and there are no errors anywhere I can find, but after you start it, port 3443 is not open on the local host to access the server. If you look at the process list you can see it seems to be running:
root 25037 0.4 0.5 678832 30244 ? Sl 10:24 0:01 /usr/bin/nodejs bootloader.js
Any ideas where to start?
root 25037 0.4 0.5 678832 30244 ? Sl 10:24 0:01 /usr/bin/nodejs bootloader.js
Any ideas where to start?
-
mike@surfglobal.net - Member
- Posts: 16
- Joined: Wed Feb 17, 2016 8:24 pm
- Location: St. Albans, VT
- Has thanked: 0 time
- Been thanked: 0 time
Re: Netonix Manager / Control Software
I just checked out the crash.log and these entries are in it, not sure if this helps
events.js:72
throw er; // Unhandled 'error' event
^
Error: listen EADDRINUSE
at errnoException (net.js:904:11)
at Server._listen2 (net.js:1042:14)
at listen (net.js:1064:10)
at Server.listen (net.js:1138:5)
at Object.<anonymous> (/opt/netonix-manager/app.js:602:116)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Function.Module.runMain (module.js:497:10)
at startup (node.js:119:16)
at node.js:906:3
js-bson: Failed to load c++ bson extension, using pure JS version
events.js:72
throw er; // Unhandled 'error' event
^
Error: listen EADDRINUSE
at errnoException (net.js:904:11)
at Server._listen2 (net.js:1042:14)
at listen (net.js:1064:10)
at Server.listen (net.js:1138:5)
at Object.<anonymous> (/opt/netonix-manager/app.js:602:116)
at Module._compile (module.js:456:26)
at Object.Module._extensions..js (module.js:474:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Function.Module.runMain (module.js:497:10)
at startup (node.js:119:16)
at node.js:906:3
js-bson: Failed to load c++ bson extension, using pure JS version
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: Netonix Manager / Control Software
The error (EADDRINUSE) indicates that the port it is trying to use (3443) is already in use and so it can't start.
You can try 'netstat -n -a -p |grep 3443' and see if it finds anything.
You can try 'netstat -n -a -p |grep 3443' and see if it finds anything.
-
mike@surfglobal.net - Member
- Posts: 16
- Joined: Wed Feb 17, 2016 8:24 pm
- Location: St. Albans, VT
- Has thanked: 0 time
- Been thanked: 0 time
Re: Netonix Manager / Control Software
We finally got it installed and is working but the interface is extremely buggy on the debian server. Of course 1.0.0rc9 came out a day later that we upgraded to. No change in the bugginess of the web interface. The crash error notice always stays on top even if you click on the link to send the crash report.
Who is online
Users browsing this forum: No registered users and 21 guests