I have one location that I have replaced AC switch (WS-12-250-AC) when failed, with a 48 volt supplied unit (WS-12-250-DC) , and then it failed, Replace 48 volt supply to no avail.
One ac and one dc, after leaving each off overnight, they seem to work fine.
Not using any POE ports on either,
Was stormy when each occurred, no water got to switches, no lightning to speak of,
Any clues?
10 port Fiber fed switch fail and then ok off for 12 hours
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: 10 port Fiber fed switch fail and then ok off for 12 hou
what firmware are you using, and what do you mean failed?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 10 port Fiber fed switch fail and then ok off for 12 hou
Was there rain?
Is the tower grounding system bonded to the Electrical service ground?
Do you have dedicated ground runs to the radios that is shorter path to Earth Ground than the Ethernet Cables.
Here are some good posts on grounding:
viewtopic.php?f=30&t=188
viewtopic.php?f=30&t=1429
Is the tower grounding system bonded to the Electrical service ground?
Do you have dedicated ground runs to the radios that is shorter path to Earth Ground than the Ethernet Cables.
Here are some good posts on grounding:
viewtopic.php?f=30&t=188
viewtopic.php?f=30&t=1429
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
tcknudson - Member
- Posts: 61
- Joined: Fri Oct 30, 2015 6:43 am
- Location: Henderson, NV
- Has thanked: 4 times
- Been thanked: 22 times
Re: 10 port Fiber fed switch fail and then ok off for 12 hou
was rain each time but no sign of water in either switch both work fine when returned to my bench.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 10 port Fiber fed switch fail and then ok off for 12 hou
tcknudson wrote:was rain each time but no sign of water in either switch both work fine when returned to my bench.
Rain causes ground potential shifts
read these 2 posts - THE WHOLE POSTS DO NOT SKIM THEM
viewtopic.php?f=30&t=188
viewtopic.php?f=30&t=1429
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 34 guests