HIKVision cameras work well with these switches. The outdoor PTZ cameras that require a "POE ++" injector work perfect with the 48VH poe output, and poe+ cameras all work well with 48V.
LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWITCHES
-
mrprimo - Member
- Posts: 42
- Joined: Sun Aug 30, 2015 4:26 am
- Location: Taranaki, New Zealand
- Has thanked: 7 times
- Been thanked: 6 times
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Cambium PTP 650 Integrated can be powered off 48VH with no issues at all.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Has anyone tried an old Trango Atlas 5010 or TLink-45? In the original post the Tycon PoE Crossover product is mentioned, which sounds like it would work. However as it's a Cambium compatible product I think doing the re-crimp like Matt mentions (crimp PINS 1,2,3,6 down properly, SWAP PIN 4 with 7 and 5 with 8) will work. I think doing that re-termination on both ends of the cable and then setting the Netonix port to 24v will do the job, but I would appreciate any feedback.
Thanks.
Thanks.
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
qlex wrote:Has anyone tried an old Trango Atlas 5010 or TLink-45? In the original post the Tycon PoE Crossover product is mentioned, which sounds like it would work. However as it's a Cambium compatible product I think doing the re-crimp like Matt mentions (crimp PINS 1,2,3,6 down properly, SWAP PIN 4 with 7 and 5 with 8) will work. I think doing that re-termination on both ends of the cable and then setting the Netonix port to 24v will do the job, but I would appreciate any feedback.
Thanks.
If you swapped both ends you would get no change.
You swap the pins on one side only.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Good point, lol. We'll give it a shot and report back. Thanks!
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
I can confirm that we have a Trango Atlas 5010 and TLink-45 5055 working via Netonix now. Thanks.
- colinhowlin
- Member
- Posts: 46
- Joined: Wed Feb 17, 2016 10:00 am
- Location: Ireland
- Has thanked: 2 times
- Been thanked: 2 times
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Can confirm newer Cambium 450i AP works ok at 48V.
This is different to standard 450 AP which should be powered up at 24V.
This is different to standard 450 AP which should be powered up at 24V.
-
petecarlson - Experienced Member
- Posts: 107
- Joined: Thu Aug 28, 2014 7:04 pm
- Location: Baltimore, MD
- Has thanked: 15 times
- Been thanked: 10 times
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Anyone know if the Mimosa A5 can be powered with the WS-12-250-DC and if so, what power?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
petecarlson wrote:Anyone know if the Mimosa A5 can be powered with the WS-12-250-DC and if so, what power?
Yes you can power any MIMOSA radio with 48V or preferably 48VH. The MIMOSA has a polarity correction circuits.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- ozmetaldrummer
- Member
- Posts: 7
- Joined: Thu Apr 21, 2016 10:02 pm
- Location: Sydney, Australia
- Has thanked: 2 times
- Been thanked: 1 time
Re: LIST OF POEDEVICES THAT DO AN DO NOT WORK WITH WISP SWIT
Ubiquiti Powerbridge M10 ??
Who is online
Users browsing this forum: No registered users and 14 guests