WS 8 250 DC 24V 1A on Port 1 or 2

[wlst]

Hi can i use port 1 or 2 at WS 8 250 DC with 24V 1A passive (4,5+ 7,8-) ?

Thanks
Thomas

[lligetfa]

No. 2 pair PoE is limited to .75A.

[sirhc]

Some switches do offer 1.5A with 24VH but that is using all (4) pair which means it is only .75A on (2) pair (pins 4,5 + and 7,8 -) and another .75A on the other (2) pair (pin 1,2 + and 3,6 - )

DO NOT USE 24VH ON ANY OTHER DEVICE THAN AF2X, AF3X, AF5X OR A DEVICE SPECIFICALLY DESIGNED TO ACCEPT POWER ON ALL 4 PAIR OR YOU WILL FRY THE DEVICE AND THE PORT AND THIS IS NOT COVERED UNDER WARRANTY.

Note: New AFX radios support 48V and 48VH as well as 24VH see this post viewtopic.php?f=6&t=1215#p9040

24V and 48V @ .5A or .75A using 2 pair Pins 4,5 [+] and Pins 7,8 [-]

24VH and 48VH @ 1.2A or 1.5A using 4 pair Pins 1,2,4,5 [+] Pins 3,6,7,8 [-]
It achieves the higher amperage by splitting the load across all 4 pair

Now this is not to say that the switch will not try and deliver 1A especially if the switch is in a cool area but you are over driving the Ethernet Transformers and could damage them as they are not rated for that current.

However with that said some devices come with a 1A POE brick but that does not mean the device uses 1A. Most UBNT radios come with a 1A POE brick but the device only uses .5A or less which you can see as we give you the current that the device is using on the Status Tab

[sirhc]

What are you wanting to power at 24V 1A?

[lligetfa]

What are you wanting to power at 24V 1A?

It would be good to know and whether that kit has the option of powering separately via a barrel connector or terminals. One might be able to employ a 4-pair PoE picker to pick off the power to feed separately.

[lligetfa]

BTW, if you really need 24V 1A, you could always send 48V into the http://routerboard.com/RBGPOE-CON-HP and use the 24V 1A it puts out.

[wlst]

24VH 1A pins 1,2,4,5(+) 3,6,7,8(-)

But my WS 8 250 DC dont deliver 24 VH

Gruß
Thomas

[wlst]

P.S sorry for delay working day and night.

[sirhc]

No, the WS-8-250-XX never supported 24VH

Nor does the WS-24-400X or the WS-12-250X

The models that support 24VH is
WS-10-250-AC - Ports 1-2
WS-12-250-DC - Ports 1-4
WS-12-400-AC - Ports 1-4
WS-6-MINI - Port 2

It all explained in the PDF and on the product descriptions for each item on our web site/store

[lligetfa]

P.S sorry for delay...

Your clock is two years behind.