Hi Everybody,
I'm a new WISPSwitch owner (WS-12-250-DC).
It was bought to run some Mikrotik/Rotherboard based radios (point to point links) and wireless access points at a hilltop comms site.
I've also been toying with moving some of the sites Hikvision networks cameras over to the WISPSwitch and off their individual power injectors.
The HikVision camera literatute state they support 802.3af power over Ethernet... but the WISPSwitch does not support this standard.
Has anyone in here determined yea or nay if HikVision cameras can be powered by a WISPSwitch?
Regards,
Lunokhod
WISP Switch and Hikvision cameras
-
lunokhod - Member
- Posts: 4
- Joined: Wed Feb 03, 2016 1:53 am
- Location: Australia
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WISP Switch and Hikvision cameras
If the camera is 802.3af it "should" work with 48V "passive" POE but you should consult our PDF on polarity PIN outs and their documentation to confirm they are the same.
Our 48V is:
Pin 4, 5 Positive
Pin 7, 8 Negative
48VH puts power on all 8 pins so be careful before using this option.
Our 48V is:
Pin 4, 5 Positive
Pin 7, 8 Negative
48VH puts power on all 8 pins so be careful before using this option.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WISP Switch and Hikvision cameras
You guys should make a post in the thread that lists products that work and do not work
viewtopic.php?f=6&t=1215
List the model # and POE option that works, including a small picture of the device is nice as well.
Next time it might be you looking to see if a particular device works or not.
viewtopic.php?f=6&t=1215
List the model # and POE option that works, including a small picture of the device is nice as well.
Next time it might be you looking to see if a particular device works or not.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
lunokhod - Member
- Posts: 4
- Joined: Wed Feb 03, 2016 1:53 am
- Location: Australia
- Has thanked: 0 time
- Been thanked: 0 time
Re: WISP Switch and Hikvision cameras
Thanks for the information. The next time I visit the comms site I'll do some tests with the IP cameras that are there and see how I go.
I'll update the thread that lists products that work (or not) when I get them working. I understand that the WISPSwitch is more oriented to running wireless gear.
Lunokhod.
I'll update the thread that lists products that work (or not) when I get them working. I understand that the WISPSwitch is more oriented to running wireless gear.
Lunokhod.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 27 guests