Ceragon IP20c w/ Netonix ?

[faisal]

Hello,
Anyone has tried or knows if they can power a Ceragon IP20c radio with a Netonix Switch ? (48v 1.5amp port) ?
Thanks in advance.
Regards

[sirhc]

Hello,
Anyone has tried or knows if they can power a Ceragon IP20c radio with a Netonix Switch ? (48v 1.5amp port) ?
Thanks in advance.
Regards

To clarify he means 48VH 1.2A/1.5A (depending on model/Rev)

[Magician]

Time to camp as I may be deploying one aswell :)

[mike99]

Looking at Cambium 820c spec sheet, seem like it would work except for 7 Ghz radios in 2+0 operation. Ethernet pineout information is missing.

Power Input Specifications
• Standard Input: -48 VDC
• IDU DC Input range: -40 to -60 VDC
Power Consumption Specifications
• Maximum Power Consumption (2+0
Operation) 6 GHz: 65W; 7 GHz: 75W; 11
GHz: 65W; 13-15 GHz: 55W; 18-24 GHz:
48W; 26-38 GHz: 55W
PoE Injector Mechanical Specifications
• Dimensions – 134mm(H), 190mm(W),
62mm(D), 1 kg
PoE Injector Environmental Specifications
• 33°C to +55°C (-45°C to +60°C extended)
PoE Injector Power Input Specifications
• Standard Input: -48 or +24 VDC (Optional)
• DC Input range: ±(18/40.5 to 60) VDC
(+18VDC extended range is supported as
part of the nominal +24VDC support)
PoE Injector Interfaces
• GbE Data Port supporting
10/100/1000Base-T
• Power-Over-Ethernet (PoE) Port
• DC Power Port –40V to -60V (a PoE
supporting two redundant DC feeds

[faisal]

Yeah, the same issue with the Ceragon manuals, key info is missing..

Their POE injector is rated to accept +/- 18v to 60v DC. so that is not an issue .. simple enough.
However the Radio (ODU) Is listed as only accepting -48v DC.

My question, if I someone knows... what is the difference (if any) between -48v DC vs 48v DC ? (I do understand that there is a + and - polarity in DC... ).

Regards

[mike99]

Maybe that the good answer.

http://electronics.stackexchange.com/qu ... -this-part

[allencook]

Was anyone successful?

[Mac_SPITwSPOTS]

Posting into here in the hopes someone finds the appropriate information for this.

[gripper]

Did anybody figure this out?? Faisal--what did you end up powering with?

[nickwhite]

I'm curious on this as well?

We're currently looking at the PTP820c and IP20c in 11Ghz and 18Ghz. I was told by a Ceragon person that there are a few compatible POE switches, and they thought there were some Juniper ones that worked. I was told yesterday by a Cambium person that "No. It is proprietary POE" to which I laughed internally.