Well the WS-12-250-DC switch should be connected directly to the battery bank.
24V or 48V battery bank is best but it will work on a 12V battery bank but you only have 150 watts instead of 250 watts at lower voltages.
AGM batteries are best, cost a bit more but much better.
I like using a MINN KOTA charger as they are 3 stage and capable of charging 10A per battery for recovery if completely discharged. They are also smart chargers to never overcharge and do a taper down charge.
http://www.minnkotamotors.com/Battery-C ... -Chargers/
They come in 1,2, and 4 battery bank leads.
Since they charge each battery separately you can hook your batteries in series or parallel, it does not care.
If you use the WS-12-DC you need to feed it 48V +/- conditioned power
I also like to use OPTIMA AGM batteries, usually the Blue tops
DC glory
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC glory
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: No registered users and 39 guests