Adapter for Arc Dish
Posted: Tue Aug 05, 2014 11:10 am
Well now that you've made the shit-list are you going to whip up some adapter rings ? 
Netonix Forums
Adapter for Arc Dish
Page 1 of 2
Re: Adapter for Arc Dish
Posted: Tue Aug 05, 2014 11:34 am
I guess you are referring to ARC's 34 dB dish?
Re: Adapter for Arc Dish
Posted: Tue Aug 05, 2014 12:03 pm
Yah, yah, that's the ticket 
Re: Adapter for Arc Dish
Posted: Tue Aug 05, 2014 4:21 pm
Actually we had already made the dies and such needed to produce a kit for the ARC 34 dB dish, I just had put them up on a shelf where they have been collecting dust for several years.
You really do not want an adapter ring and putting the larger dish kit on the smaller antenna with a flange wing would cut down the hostile noise but would create unwanted weird multi-path problems.
I am seriously considering it with the recent change of events.
Since this whole thing blew up I have been re-contacted by several other entities asking me to re-consider making shield kits for them as in the past I was unwilling to do so with my loyalty to my friends at Ubiquiti.
I will say that I am considering to re-evaluate that position with the way things are looking?
You really do not want an adapter ring and putting the larger dish kit on the smaller antenna with a flange wing would cut down the hostile noise but would create unwanted weird multi-path problems.
I am seriously considering it with the recent change of events.
Since this whole thing blew up I have been re-contacted by several other entities asking me to re-consider making shield kits for them as in the past I was unwilling to do so with my loyalty to my friends at Ubiquiti.
I will say that I am considering to re-evaluate that position with the way things are looking?
Re: Adapter for Arc Dish
Posted: Tue Aug 05, 2014 4:55 pm
What makes you think weird multipath problems are unwanted 
Ok so adapter is the wrong approach then, I get it now,
The fact that you are 'considering' it now leads me to respect you more than ever. Me, I run into someone on bridge that's pouring gas on it, I always offer them a light, bad habit I suppose.
Ok so adapter is the wrong approach then, I get it now,The fact that you are 'considering' it now leads me to respect you more than ever. Me, I run into someone on bridge that's pouring gas on it, I always offer them a light, bad habit I suppose.
Re: Adapter for Arc Dish
Posted: Mon Sep 01, 2014 6:26 pm
Chris, they fired a shot across your bow, it's not disloyal to not rely on a single vendor to match your product too, it's good business.
Re: Adapter for Arc Dish
Posted: Tue Sep 09, 2014 8:02 pm
I would like to see the ARC kit also.
Maybe the new Mikrotik mAnt dishes also.
Maybe the new Mikrotik mAnt dishes also.
Re: Adapter for Arc Dish
Posted: Tue Sep 09, 2014 9:25 pm
pmcnary wrote:I would like to see the ARC kit also.
Maybe the new Mikrotik mAnt dishes also.
Stay tuned, I just may?
Re: Adapter for Arc Dish
Posted: Thu Dec 18, 2014 2:02 pm
Any update on shield kit possibility for:
the arc 34
and
Mikrotik mANT30 MTAD-5G-30D3-PA (They are showing up in distribution now)
Thanks
Paul
the arc 34
and
Mikrotik mANT30 MTAD-5G-30D3-PA (They are showing up in distribution now)
Thanks
Paul
Re: Adapter for Arc Dish
Posted: Fri Dec 19, 2014 3:22 am
I was very disappointed when I looked at the design and specs of the mikrotik dish compared to others out there.
That said, the new stuff rf elements is putting out is very well design/made. The antennas, twist lock connectors (very low loss replacement for SMA jumpers), mounting options, horns and sectors... I was pretty impressed with all of them at wispapalooza.
That said, the new stuff rf elements is putting out is very well design/made. The antennas, twist lock connectors (very low loss replacement for SMA jumpers), mounting options, horns and sectors... I was pretty impressed with all of them at wispapalooza.