Page 1 of 1
POLL to change the input connectors on DC switches
Posted: Mon Aug 24, 2015 4:34 am
by expohl
Poll to change dc input connectors to screw terminals with dis-connectable plug
Re: POLL to change the input connectors on DC switches
Posted: Mon Aug 24, 2015 9:22 am
by lligetfa
This is misleading. The power posts can be used as screw terminals. There is no need to use them with banana plugs.
Re: POLL to change the input connectors on DC switches
Posted: Mon Aug 24, 2015 9:42 am
by sirhc
Guys changing the connection type would require a MAJOR redesign.
The power supply is in the back and the DC terminals are in the front.
Re: POLL to change the input connectors on DC switches
Posted: Mon Aug 24, 2015 11:21 am
by lligetfa
There is another long thread on the topic of the choice of connector so I don't see the point of rehashing it. I simply pointed out that the banana plugs are not required. I'm not sure the OP realizes that they are also screw terminals.
Re: POLL to change the input connectors on DC switches
Posted: Mon Aug 24, 2015 1:58 pm
by ryanm
expohl wrote:Poll to change dc input connectors to screw terminals with dis-connectable plug
Phoenix connectors? No, no, no!