Mini inrush
-
rkelly1 - Experienced Member
- Posts: 147
- Joined: Wed Aug 20, 2014 10:06 pm
- Location: Clermont, FL
- Has thanked: 12 times
- Been thanked: 27 times
Mini inrush
Searched forum but didnt' see the answer. Chris, what is the inrush current on the mini at startup?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Mini inrush
if it is not powering anything, just the switch itself not very much.
I do not think we tested that but it can not be 20W but I guess it would depend on the accuracy of your measuring device and how small of time increment.
I do not think we tested that but it can not be 20W but I guess it would depend on the accuracy of your measuring device and how small of time increment.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: Mini inrush
it is kept low because the power circuit has a soft start function, but I will have to measure one to give you an actual number, will try & do tomorrow...
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: Mini inrush
inrush is from 0 to about 0.8 amps, linear ramp for about 15mSec in duration.
-
rkelly1 - Experienced Member
- Posts: 147
- Joined: Wed Aug 20, 2014 10:06 pm
- Location: Clermont, FL
- Has thanked: 12 times
- Been thanked: 27 times
Re: Mini inrush
Thx. Take it that is with no poe loads. Any idea what it would be with 5 ports 24v poe on? Or does it also depend on what is plugged into the ports at startup?
-
sirhc - Employee
- Posts: 7414
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Mini inrush
rkelly1 wrote:Thx. Take it that is with no poe loads. Any idea what it would be with 5 ports 24v poe on? Or does it also depend on what is plugged into the ports at startup?
Depends on what devices it is powering and what their inrush draw is however the switch will not power up the POE until it is booted then staggers the port POE turn ups so it is not like all of them are at one shot.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
8 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 23 guests