Netonix Forums

Hi,

Due to shortages of supply in NZ, we are wondering if it is possible to replace the Power supply board in our 2 spare WS-26-500 to the ones used in the WS-26-500-DC models? (https://netonix.com/replacemet-parts/ps-500w-dc.html) Our remote sites are 24v off grid so the WS-26-500 doesn't suit these locations. I would sleep much better knowing we had two potential spare units.

Cheers,
Morgan.

different PSU/shell, but identical boards, programming aside. slap a dc-dc psu on an AC board and it will work fine, you just won't get voltage monitoring on the DC-DC power supply obviously.