WS-6-MINI Barrel plug

[ryanm]

What size barrel plug is needed to fit the mini?

Thanks!

[Dave]

2.5mm center pin

[ryanm]

Is that a 5.5mm OD?
Something like this?
http://www.mouser.com/ds/2/449/KC-300331-205813.pdf

[Dave]

Below link is actual connector on the board. Digikey has the mating connector as "2.5mm ID, 5.5mm OD"

http://www.cui.com/product/resource/pj-002bh-smt.pdf

[ryanm]

That makes it easy! Thanks, Dave!

I hadn't gotten to assemble the crazy DIN connectors that the tycon hi-power injector needs, so I was hoping I'd have a barrel plug to fit. Apparently that is a 'no', but now I know what I need.

[wayneorack]

I am hoping that it is the same as the PS that comes with Cisco phones. I have boxes of those.

[ryanm]

wayneorack: let us know when you figure it out. It's always good to know.
I MIGHT even have one of those floating around somewhere.

[wayneorack]

UPS tracking says my MINI will be here Tuesday. I'll let yo know then.

[lligetfa]

Looks like mine is locked up at the Post Office in town and I won't be able to get it before Monday.

[sirhc]

Looks like mine is locked up at the Post Office in town and I won't be able to get it before Monday.

Yea but your old one works fine for now!