Netonix Forums

I am powering my WS-6-MINI via port 1 with an Ubiquiti injector, model GP-C500-120G. The rated power output is 50V max 1.5A.

I connected an IP cam to port 6, verified the port is set to 24v, and connected the camera; The camera, Hikvision DS-2CD2732F-I(S) is 12V and draws 5.5W max.
The camera will not power on via POE from the WISP. I have connected the camera directly to the injector, and that works just fine.

Aside from activating the port to 24V, is there an additional step I need to take to power the camera? Am I simply misunderstanding how POE works?

That cam is only 12V if powered separately. Powered over ethernet, it is 802.3af so you need to set the PoE to 48V.

Thank you, that was the issue!