Hello All, I've been testing with a netonix wisp mini and IGMP Snooping is not working as expected.
Using MC Hammer I'm running multicast data tests and the Netonix is broadcasting on all ports not the one receiving multicast, this occurs with IGMP Snooping on or off.
The same test using a Luminex Gigaswitch works flawlessly.
Can anyone advise?
Tim
IGMP Snooping
- jifop
- Member
- Posts: 4
- Joined: Mon Nov 09, 2020 10:18 am
- Has thanked: 0 time
- Been thanked: 0 time
-
Stephen - Employee
- Posts: 1030
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 85 times
- Been thanked: 181 times
Re: IGMP Snooping
IGMP Snooping and Multicast have been long running issues. Right now if the snooping fails you should be able to re-activate it by simply turning IGMP Snooping off and on again. (Also, make sure you are running the latest firmware, presently 1.5.6)
- jifop
- Member
- Posts: 4
- Joined: Mon Nov 09, 2020 10:18 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: IGMP Snooping
Oh dammit I wasn't aware of that.
Turning snooping on and off every day isn't really an option but nor is broadcasting the multicast data.
I guess I will reserve this switch for smaller networks.
Turning snooping on and off every day isn't really an option but nor is broadcasting the multicast data.
I guess I will reserve this switch for smaller networks.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 24 guests