802.3 BT draft V.2 compatible?

User avatar
sswireless
Member
 
Posts: 4
Joined: Mon Oct 26, 2015 10:15 pm
Location: Roswell, NM
Has thanked: 0 time
Been thanked: 3 times

802.3 BT draft V.2 compatible?

Mon May 18, 2020 12:18 pm

I have a customer utilizing a Netonix switch in an A/V project. they are needing to power a Pananosic UE-150 camera on the Netonix and are concerned about its compatibility. As are we. This is the response from Panasonic we recieved:


The spec for our cameras is
ieee802.3bt draft v.2 standard. This standard is 71 W to 90 W at 1.6 A. The power injectors that we recommend are the Geovision GV-PA901 or equivalent. I have linked this product here.
http://www.geovision.com.tw/product/GV-PA901%20PoE%20Adapter.
The switch that I have tested is this one.
https://planet.com.tw/en/product/gs-5220-8up2t2x

Now i know that Netonix can provide this on their units depending on model, but outside of it being passive PoE, will this work and not cause any damage? The reason we've not abandoned this idea due to the above information, is the switch is critical to every other aspect as well and so cannot be easily replaced at this time. If we can get more information on the above info, it would greatly help us out. Thank you in advance.

User avatar
mike99
Associate
Associate
 
Posts: 837
Joined: Tue Nov 25, 2014 10:53 am
Location: Quebec, Canada
Has thanked: 95 times
Been thanked: 245 times

Re: 802.3 BT draft V.2 compatible?

Mon Dec 27, 2021 11:49 pm

All I can say is that personally, I never had issue to power active PoE device passively.

But, Netonix is 48V and 1.5A max, not 1.6A. Could this be an issue ? 71W is really short since 1.5V * 48V = 72V MAX while 90 at 1.6A means 56.25V.

If critical, I would personally use recommended power supply instead of netonix power.

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 16 guests