Cisco Trunk to Netonix
Posted: Tue Sep 10, 2019 2:33 pm
Hello,
I have a CISCO trunk port that is connected to a Netonix. I use an native vlan on CISCO Trunk.
Netonix VLAN tab : https://i.ibb.co/8sj3t9M/vlan.jpg
Is the CISCO/Netonix configuration correct ?
I have a CISCO trunk port that is connected to a Netonix. I use an native vlan on CISCO Trunk.
- Code: Select all
interface GigabitEthernet1/0/4
description *Netonix port1*
switchport trunk allowed vlan 10-144,200
switchport trunk encapsulation dot1q
switchport trunk native vlan 200
switchport mode trunk
Netonix VLAN tab : https://i.ibb.co/8sj3t9M/vlan.jpg
Is the CISCO/Netonix configuration correct ?