Page 1 of 1
WS-24-400B log fault SFP: FAULT on SFP 2, resetting...
Posted: Mon Aug 05, 2019 7:05 am
by smaicas
We have an ES-24-400B that for some time now shows the following message in the log Aug 5 11:43:27 SFP: FAULT on SFP 2, resetting ... every two seconds
We have reset the switch, updated the firmware and disabled the port but the problem persists.
There is a solution
Re: WS-24-400B log fault SFP: FAULT on SFP 2, resetting...
Posted: Tue Aug 06, 2019 3:25 pm
by Stephen
Best place to start is making sure you are on the latest firmware (1.5.3) and if that doesn't work (or if you are already on the latest) Try a different SFP module.
Here is a list of repoted compatible/incompatible SFP module's
Re: WS-24-400B log fault SFP: FAULT on SFP 2, resetting...
Posted: Wed Aug 07, 2019 3:36 am
by smaicas
Firmaware is (1.5.3) and any SFP muodele is connected
Re: WS-24-400B log fault SFP: FAULT on SFP 2, resetting...
Posted: Wed Aug 07, 2019 9:04 am
by sirhc
If you tried other SFP modules from the list of known working modules then maybe a hardware issues.
Most likely can not be repaired and since the WS-24-400B was EOL 3 years ago we no longer have replacement boards.
Your welcome to RMA it and if we can not repair it you can always abandon it.